High-Strength Cold-Rolled Steel for Container Liners
Ultra-thin high-strength steel coil cold-rolled to <0.5 mm thickness, width >600 mm, for shipping container interior lining. Classed under 7209.18.15.60 as other high-strength nonalloy steel in coils, no plating or cladding applied.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made into containers
Complete containers/tanks from this steel classify under heading 7309.
If silicon content >0.5%
Higher silicon may qualify as grain-oriented electrical steel in different subheading.
If enameled surface
Enameling is explicit 'further worked' coating, excluding from 7209 uncoated.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Large coil volumes—file prior notice via ACE system 24hrs before arrival
• Confirm not 'razor blade steel' per US Note 72(d)—different width/thickness specs
• Document cold-rolling reduction ratio if audited for process verification
Related Products under HTS 7209.18.15.60
High-Strength Cold-Rolled Steel Coil for Automotive Panels
Flat-rolled high-strength steel coil, cold-rolled to a thickness under 0.5 mm and width over 600 mm, used for outer body panels in vehicles. Classified under HTS 7209.18.15.60 as high-strength steel (minimum yield point 355 MPa for thickness >=3mm or 275 MPa for thinner), not further worked beyond cold-rolling, in coils. Meets Chapter 72 definitions for nonalloy high-strength steel products.
High-Strength Cold-Rolled Steel for Appliance Housings
Cold-rolled nonalloy steel coil under 0.5 mm thick, over 600 mm wide, high-strength grade for refrigerator and washer outer casings. Falls under 7209.18.15.60 as 'other' high-strength steel in coils, not clad/plated/coated, per US note definitions for yield strength qualification. Ideal for formable structural components.
Automotive High-Strength Steel for Chassis Components
Cold-reduced high-strength steel coil <0.5 mm thick, >600 mm wide, nonalloy, for inner chassis reinforcements in cars. Specifically 'other' under 7209.18.15.60 as it meets yield strength thresholds, remains in coil form without cladding or further processing.
High-Strength Cold-Rolled Steel for Furniture Frames
Ultra-thin high-strength steel coil (thickness <0.5 mm, width >600 mm), cold-rolled, for metal office furniture structural frames. Classifies in 7209.18.15.60 as other high-strength nonalloy steel coils, not further worked, qualifying by minimum yield strength per US notes.
High-Strength Steel Coil for Elevator Cabins
Cold-rolled nonalloy high-strength steel in coils, thickness below 0.5 mm, width over 600 mm, for elevator interior wall panels. HTS 7209.18.15.60 covers this 'other' category for qualifying high-strength steel without plating or further working.
High-Strength Cold-Rolled Steel for Shelving Systems
Thin cold-rolled high-strength steel coil (<0.5 mm x >600 mm), nonalloy, for heavy-duty industrial shelving uprights. Fits 7209.18.15.60 as other high-strength steel in coils, cold-reduced without cladding, meeting yield point standards.