Commercial Quality Annealed Steel for Roofing Flashings
1.6 mm cold-rolled nonalloy steel coil, 750 mm wide, batch annealed to commercial quality (CQ) grade for gutter and flashing production. HTS 7209.16.00.70 designation for cold-rolled annealed coils in this thickness, width over 600 mm, no further processing. Provides cost-effective formability for construction trades.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If electrolytically coated
Electrolytic plating excludes from uncoated cold-rolled classifications.
If not annealed (full hard)
Same dimensions but without annealing process classify under full-hard cold-rolled.
If pre-formed roofing components
Assembled or welded steel structures for roofing enter Chapter 73.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• CQ grade chemistry specs (C≤0.10%, Mn≤0.60%) must accompany entry to confirm nonalloy status
• Coil ID/OD measurements required; affects freight and customs valuation
• Monitor AD/CVD orders on specific country origins for this steel grade
Related Products under HTS 7209.16.00.70
Annealed Cold-Rolled Steel Coil for Automotive Panels
This is a flat-rolled nonalloy steel coil, cold-rolled to a thickness of 1.5 mm and width over 600 mm, specifically annealed to achieve uniform microstructure and improved formability. It falls under HTS 7209.16.00.70 as it matches the criteria for cold-rolled, not further worked, annealed steel in coils exceeding 1 mm but under 3 mm thickness. Annealing softens the steel for deep drawing in car body panel manufacturing.
Annealed CR Steel Coil for Home Appliance Housings
Cold-rolled nonalloy steel coil measuring 2.0 mm thick and 1,200 mm wide, annealed for enhanced ductility used in refrigerator and washer exteriors. Classified under HTS 7209.16.00.70 for its cold-rolled, annealed state in coils, thickness 1-3 mm, without cladding or coating. The annealing process relieves internal stresses from cold reduction.
Soft Annealed Steel Coil for Metal Furniture Frames
Nonalloy steel coil cold-rolled to 1.8 mm thickness, over 800 mm wide, box annealed for softness ideal for office chair and desk frame fabrication. HTS 7209.16.00.70 applies to this 'other' annealed cold-rolled coil product not further worked, meeting precise dimensional and processing specs. Annealing ensures excellent bending properties without cracking.
Annealed Cold-Reduced Steel for HVAC Ductwork
1.2 mm thick cold-reduced nonalloy steel coil, 1,000 mm wide, continuously annealed for air conditioning duct fabrication requiring high cleanliness. Fits HTS 7209.16.00.70 as cold-rolled (synonymous with cold-reduced), in coils, annealed, thickness specs met, no cladding/coating. Provides bright finish and consistent mechanical properties.
Full-Hard Annealed Steel Coil for Shelving
Cold-rolled nonalloy steel coil at 2.5 mm thickness, 900 mm wide, skin-passed and annealed from full-hard condition for commercial shelving. HTS 7209.16.00.70 covers this annealed product in the 'other' category, cold-rolled not further worked, precise thickness range. Balances strength and workability for retail fixtures.
Bright Annealed Steel Coil for Electrical Enclosures
2.2 mm thick, 1,100 mm wide cold-rolled coil with bright annealing in protective atmosphere for NEMA-rated electrical boxes. Classifies precisely under HTS 7209.16.00.70: nonalloy, cold-rolled coils, annealed, 1-3 mm thick, not clad/plated/coated. Bright finish minimizes post-processing needs.