Structural High-Strength Annealed Steel Coil for Bridge Components
Annealed cold-rolled high-strength steel coil, 1.8 mm thick, 1500 mm wide, nonalloy with 300 MPa yield strength, in coils. HTS 7209.16.0045 applies to this 'other' category product not further worked than cold-rolled/annealed. Used in secondary structural elements for bridges and infrastructure.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cut to length/not in coils
Coil form specifies 7209; non-coil flat-rolled products shift to 7211.
If silicon-electrical steel
Special alloy compositions for electrical use move to Chapter 72 electrical steel headings.
If for equipment towers/structures
Fabricated bridge truss sections classify as structures in 7308, not material form.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit yield strength test certificates from accredited labs meeting 275 MPa minimum for high-strength designation
• Verify no 'further worked' treatments per Chapter 72 note (e.g
• no painting or cladding allowed)
• Monitor AD/CVD orders on specific steel producers; request scope rulings if uncertain
Related Products under HTS 7209.16.00.45
High-Strength Annealed Cold-Rolled Steel Coil for Automotive Chassis
This is a flat-rolled high-strength steel coil of iron or nonalloy steel, cold-rolled to a thickness between 1-3 mm and width over 600 mm, annealed for improved formability. It meets the high-strength steel definition (thickness 1-3 mm with minimum yield point of 275 MPa) and is not further worked beyond cold-rolling and annealing, classifying it under HTS 7209.16.0045. Primarily used in automotive structural components requiring strength and ductility.
Annealed High-Strength Steel Coil for Heavy Machinery Frames
Cold-rolled high-strength steel coil, thickness 1.5-2.5 mm, width 800 mm, annealed, of nonalloy steel with yield strength exceeding 275 MPa. Classified under HTS 7209.16.0045 as 'other' annealed high-strength steel not further worked, in coils. Used for fabricating durable frames in construction and agricultural machinery.
High-Strength Annealed CR Steel Coil for Trailer Manufacturing
Flat-rolled cold-reduced (CR) steel coil of high-strength nonalloy steel, 1.2-2.8 mm thick, over 600 mm wide, annealed twin-rolled for uniformity. Falls under HTS 7209.16.0045 as other annealed high-strength steel in coils, not clad/plated. Essential for lightweight yet strong trailer sidewalls and undercarriages.
Automotive Grade Annealed High-Strength Steel Coil HSLA-Type
HSLA-type (High Strength Low Alloy) nonalloy steel coil, cold-rolled to 2 mm thickness, annealed, width 1200 mm, yield 290 MPa. Precisely matches HTS 7209.16.0045 for annealed high-strength steel coils not further worked. Optimized for crash-resistant automotive body panels.
Construction Grade Annealed Cold-Rolled High-Strength Steel Coil
High-strength steel coil for construction applications, cold-rolled 2.2 mm thick, 900 mm wide, annealed, 280 MPa yield, nonalloy iron/steel. HTS 7209.16.0045 'other' category for annealed high-strength not further worked. Used in purlins, girts, and framing systems.
Appliance Frame High-Strength Annealed Steel Coil
Cold-rolled annealed high-strength steel coil for washing machine and refrigerator frames, 1.6 mm thickness, 700 mm width, 275+ MPa yield. Classifies under HTS 7209.16.0045 as other annealed high-strength steel in coils, not further worked. Provides strength-to-weight ratio for appliance chassis.