Construction Grade HR Steel Sheet 3.5mm
Hot-rolled nonalloy steel sheet for construction, 3.5 mm thick, 1,000 mm wide, not in coils and hot-rolled only. Fits HTS 7208.53.00.00 for its width, thickness specs, and lack of plating, cladding, or additional processing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not further worked than hot-rolled, in coils
Coil form for same specs shifts to 7211 series for continuous products.
If thickness of less than 3 mm
Thinner hot-rolled non-coil sheets classify under 7209.
If pre-fabricated into structural shapes
Any bending/profiling post-rolling moves to Chapter 73 finished articles.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Use EN 10025 or ASTM A36 equivalent specs in documentation for construction compliance
• Check for unintentional coatings; even light oiling may require further-worked classification
• File under general rate unless quota-eligible; track Section 232 exclusions
Related Products under HTS 7208.53.00.00
Hot-Rolled Nonalloy Steel Plate 4mm Thick
Flat-rolled nonalloy steel plate measuring 3.5 mm thick and 1,200 mm wide, hot-rolled and supplied in sheets not in coils. It falls under HTS 7208.53.00.00 as it matches the exact thickness range of 3 mm or more but less than 4.75 mm, is not further worked beyond hot-rolling, and has a width exceeding 600 mm.
Universal Mill Steel Plate 3.8mm
Universal mill flat-rolled nonalloy steel plate, 3.8 mm thick, 800 mm wide, rolled on four faces without patterns, not in coils. Meets HTS 7208.53.00.00 criteria for thickness, width over 600 mm, and hot-rolled state without cladding or coating.
Hot-Rolled Shipbuilding Steel Plate 4.2mm
Nonalloy steel plate for shipbuilding, hot-rolled to 4.2 mm thickness, 2,000 mm wide, supplied as discrete sheets. Classifies in 7208.53.00.00 due to precise thickness band, non-coiled form, and absence of further working or alloying.
Industrial Machinery Base Steel Plate 3.9mm
Hot-rolled mild steel plate 3.9 mm thick, 900 mm wide for machinery bases, supplied flat in sheets. Precisely matches 7208.53.00.00 as nonalloy, hot-rolled only, correct dimensions without further treatments.
HRPO Steel Sheet 3.2mm Thick
Hot-rolled pickled and oiled (HRPO) nonalloy steel sheet, 3.2 mm thick, 1,500 mm wide, in cut-to-length sheets. While pickled, it qualifies under 7208.53.00.00 if not considered 'further worked' beyond basic hot-rolling per U.S. notes, for widths over 600 mm.