Commercial Quality Hot-Rolled Steel Coil 2.0mm
Commercial quality (CQ) hot-rolled nonalloy steel coil, precisely 2.0 mm thick, width 1,500 mm, not clad or coated, for general sheet metal work. Meets HTS 7208.39.00.90 criteria: hot-rolled coils of nonalloy steel <3 mm thick, >600 mm wide, other than specified exclusions.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If high-strength steel per note 72(a)
Specific high-strength composition triggers dedicated subheading with potentially different treatment.
If clad, plated, or coated
Any cladding/coating (per Chapter note) excludes from 7208, moving to clad/plated headings.
If semi-finished product
Thicker semi-finished slabs (>4.75mm typically) classify under 7207, not finished hot-rolled 7208.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Use standard ASTM A1011/A1011M specs documentation for commercial quality verification
• Measure thickness at multiple points; average must be <3 mm for this subheading
• Avoid misdeclaration as drawing quality (DQ) which may have different statistical suffixes
Related Products under HTS 7208.39.00.90
Hot-Rolled Low-Carbon Steel Coil 2.5mm Thick
A flat-rolled product of nonalloy steel, hot-rolled in coils, with a width over 600 mm and thickness of 2.5 mm, not further worked beyond hot-rolling. It falls under HTS 7208.39.00.90 as it matches the criteria for hot-rolled nonalloy steel coils under 3 mm thick, excluding specific types like high-strength steel. Commonly used for general fabrication and stamping.
HRPO Steel Coil for Automotive Stamping 2.8mm
Hot-rolled pickled and oiled (HRPO) steel coil of nonalloy steel, 2.8 mm thick, over 600 mm wide, in coil form without further working beyond basic hot-rolling process. Classifies under 7208.39.00.90 as 'other' hot-rolled nonalloy steel coils under 3 mm; pickling/oiling often considered not 'further worked' if minimal. Used in auto body panel production.
Hot-Rolled Mild Steel Coil 1.8mm for Appliance Manufacturing
Mild steel (low carbon nonalloy) hot-rolled coil, 1.8 mm thickness, width 1,200 mm, not clad, plated, or coated beyond hot-rolling. Fits HTS 7208.39.00.90 as other hot-rolled nonalloy steel coils <3 mm thick, ideal for washing machine and refrigerator outer panels.
Hot-Rolled Steel Coil 2.2mm for HVAC Ductwork
Nonalloy steel hot-rolled coil, 2.2 mm thick, 900 mm wide, in coil form, not further worked, used for fabricating heating ventilation air conditioning duct systems. Classified under 7208.39.00.90 as other hot-rolled flat products of iron/nonalloy steel <3 mm thick, >600 mm wide.
Hot-Rolled Nonalloy Steel Coil 2.9mm for Furniture Frames
2.9 mm thick hot-rolled coil of nonalloy steel, 800 mm wide, uncoated and unclad, used in metal furniture frame fabrication. Falls precisely under HTS 7208.39.00.90 as 'other' hot-rolled nonalloy steel flat products in coils <3 mm thick.
ASTM A36 Hot-Rolled Steel Coil 2.4mm
ASTM A36 specification hot-rolled carbon steel coil, 2.4 mm nominal thickness, width exceeding 600 mm, in coil form, not further processed. Classifies under 7208.39.00.90 as standard nonalloy hot-rolled flat-rolled products <3 mm thick, widely used in structural fabrication.