HR400Y Automotive Steel Coil
Hot-rolled dual-phase HR400Y steel coil for lightweight vehicles, 1.8 mm thickness, 1400 mm width, yield >275 MPa, in coils without further processing. HTS 7208.39.0025 as other high-strength steel, nonalloy, hot-rolled.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further worked with profiles
Hot-rolled base with added corrugations or profiles becomes 'other shaped' products.
If in universal mill plate not coils
Same high-strength steel but not in coils uses plate-specific classification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit tensile test results from accredited labs confirming high-strength per U.S. note (a)
• Ensure proper HTS reporting at 10-digit level; .0025 specifically for 'other' high-strength <3 mm
• Beware of mixed coils - if containing non-high-strength portions, may require separate entries
Related Products under HTS 7208.39.00.25
High-Strength Hot-Rolled Steel Coil HR450
Hot-rolled steel coil of nonalloy steel with minimum yield strength of 355 MPa and thickness under 3 mm, width over 600 mm, supplied in coils without cladding, plating, or coating. Classified under HTS 7208.39.0025 as high-strength steel per U.S. note (a) - thickness <3 mm and yield point ≥275 MPa, not further worked beyond hot-rolling.
SAE J2745 HR460Y Hot-Rolled Steel Coil
Automotive-grade hot-rolled steel coil meeting SAE J2745 HR460Y spec with yield strength exceeding 275 MPa, thickness 2.5 mm, width 1500 mm, in coils not further worked. HTS 7208.39.0025 applies as high-strength nonalloy steel per definition, ideal for crash-resistant vehicle structures.
S355MC Hot-Rolled High-Strength Steel Coil
EN 10025-4 compliant S355MC structural steel coil, hot-rolled, 2.8 mm thick, 1800 mm wide, yield strength 355 MPa minimum, not clad or coated. Falls under 7208.39.0025 as high-strength steel (<3 mm thick, ≥275 MPa yield) for construction and machinery.
High-Strength SAPC440 Steel Coil
Hot-rolled SAPC440 steel coil for pressed auto parts, thickness 2.2 mm, width 1650 mm, minimum yield 440 MPa (high-strength per note a), uncoated coils. Precisely matches HTS 7208.39.0025 criteria.
Grade 50W Hot-Rolled Steel Coil
Weathering-resistant Grade 50W high-strength steel coil, hot-rolled 2.75 mm thick, 1200 mm wide, yield strength 345 MPa, for bridge girders. HTS 7208.39.0025 as high-strength nonalloy hot-rolled coil.