High-Strength Hot-Rolled Pickled Steel Coil SPHC590
A flat-rolled high-strength steel coil of iron or nonalloy steel, 1.5 mm thick and 1,200 mm wide, hot-rolled, pickled but not further worked, with minimum yield point of 355 MPa exceeding 275 MPa threshold. Classifies under HTS 7208.27.0045 as high-strength steel under 3 mm thickness, in coils, not clad, plated or coated. Used primarily for structural automotive panels requiring enhanced formability and strength.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not certified as high-strength steel
Fails US Note 72(a) yield point criteria, shifting to general other flat-rolled hot-rolled pickled steel under 3 mm.
If not in coils
Cut-to-length sheets or plates of high-strength steel under 3 mm move to Chapter 72 heading 7211 for non-coil forms.
If alloy steel composition
Exceeds nonalloy steel limits with added alloying elements, classifying under alloy steel flat products in heading 7225.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify minimum yield strength at entry per US Note 72(a) to qualify as high-strength steel; provide mill test certificates confirming nonalloy composition and pickling process
• Avoid rust discoloration claims as no duty allowance per chapter notes
• Ensure coil width over 600 mm and thickness documented accurately
Related Products under HTS 7208.27.00.45
Elevator Door HRP High-Strength Steel Coil
High-strength steel coil for elevator door panels, 2.4 mm thick, 1,400 mm wide, hot-rolled pickled, 380 MPa yield strength certified. HTS 7208.27.0045: nonalloy flat-rolled high-strength steel <3 mm, coils, pickled only, >600 mm width.
Furniture Frame HRP Steel Coil DD14
DD14 drawing quality high-strength steel coil for metal furniture frames, 1.0 mm x 800 mm, hot-rolled pickled, enhanced yield strength. HTS 7208.27.0045 covers this thin high-strength nonalloy coil >600 mm wide, pickled surface.
Automotive Grade HRP Steel Coil S355MC
Hot-rolled pickled high-strength steel coil, 2.0 mm thick, 1,500 mm wide, nonalloy steel with 355 MPa minimum yield, used for car chassis components. Meets HTS 7208.27.0045 as flat-rolled product over 600 mm wide, under 3 mm thick, high-strength per US Note 72(a), in coils, pickled only. Provides superior crash resistance in vehicle manufacturing.
Construction HRP High-Strength Steel Coil Grade 50
Grade 50 high-strength low-alloy steel coil, hot-rolled and pickled, 2.5 mm x 1,000 mm, minimum yield 345 MPa (exceeding criteria), for bridge girders and structural beams. Fits HTS 7208.27.0045: nonalloy flat-rolled iron/steel >600 mm wide, <3 mm thick, high-strength, coiled, pickled not further worked.
HRP Steel Coil for Heavy Equipment Frames ASTM A1011
ASTM A1011 high-strength steel coil, 1.8 mm thick, 1,300 mm wide, hot-rolled pickled, yield strength 310 MPa, for bulldozer and excavator frames. HTS 7208.27.0045 applies to this nonalloy, unclad coil >600 mm wide, <3 mm, high-strength per note 72(a).
Pipe Manufacturing HRP Steel Coil HSLA Grade 70
HSLA Grade 70 high-strength steel coil for welded pipe production, 2.2 mm x 1,450 mm, hot-rolled pickled, 485 MPa yield exceeding high-strength criteria. Precisely HTS 7208.27.0045: flat-rolled nonalloy steel coils >600 mm, <3 mm thick, pickled only.