Carbon Steel Slab 0.4% C, 200mm x 50mm
Semifinished carbon steel slab containing 0.4% carbon, with rectangular cross section 200mm width x 50mm thickness (width 4x thickness but classified under .25 subheading per tariff structure). Used in rolling mills for plate production. Fits HTS 7207.20.00.25 criteria for high-carbon nonalloy steel billets/slabs.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If for non-rectangular cross sections like round or hexagonal
Semifinished products of other than rectangular cross section classify under 7207.12.
If rolled and presented as concrete reinforcing bars with ribs/deformations
Hot-rolled deformed rebar per Note (c) falls under 7213.91 as worked bars, not semifinished.
If hot-rolled into coils with thickness ≥4.75mm
Coiled hot-rolled products shift from semifinished to flat-rolled under heading 7208.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Measure cross section precisely; even slight variations could shift to wider products under different statistical suffixes
• Require chemical analysis reports from producer confirming nonalloy status and carbon ≥0.25% to prevent alloy misclassification
• Declare intended use as semifinished; finished bars/rods risk reclassification to Chapter 72 worked products
Related Products under HTS 7207.20.00.25
Carbon Steel Bloom 0.3% C, 150mm x 150mm
A semifinished carbon steel bloom with 0.3% carbon content and rectangular cross section of 150mm x 150mm, where width equals thickness, classifying it under HTS 7207.20.00.25 as a nonalloy steel product containing 0.25% or more carbon with width less than four times thickness. Used primarily for forging into billets or bars. Meets chapter definitions for semifinished products of rectangular cross section.
High-Carbon Steel Billet 0.6% C, 120mm x 120mm
Square semifinished billet of nonalloy steel with 0.6% carbon content and 120mm x 120mm cross section (width=thickness <4x). Ideal for wire rod or bar production via hot rolling. Classified under HTS 7207.20.00.25 due to carbon level and rectangular geometry per Chapter 72 notes.
Carbon Steel Bloom 0.25% C, 180mm x 45mm
Minimum carbon (0.25%) rectangular bloom with 180mm width x 45mm thickness (4x ratio boundary). Used for heavy section forging. HTS 7207.20.00.25 applies to this nonalloy semifinished product per exact carbon threshold and cross-section specs.
Rail Steel Billet 0.7% C, 140mm x 140mm
Semifinished billet formulated for railroad rail production with 0.7% carbon, square 140mm cross section. Nonalloy per Chapter notes. Fits HTS 7207.20.00.25 as high-carbon rectangular semifinished product with width=thickness.
Tooling Steel Bloom 1.0% C, 160mm x 40mm
High-carbon bloom for drop forging tooling with 1.0% C content, rectangular 160x40mm (width 4x thickness). Remains nonalloy steel. HTS 7207.20.00.25 classification based on carbon ≥0.25%, nonalloy, and narrow rectangular section.