3 Inch Round Low Carbon Billet
3-inch (76mm) diameter round billet, nonalloy low carbon steel (<0.25% C), circular cross section for seamless pipe production. HTS 7207.19.00.30 per tariff description for other circular semifinished.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If flat-rolled, <3mm thick
Thickness/width determines flat-rolled vs solid semifinished.
If rolled/coiled into bars
Processing to bar form changes from semifinished to finished.
If alloy hollow drill pipe made
Specific end-use oilfield products have dedicated codes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide dimensional tolerance specs (+/- mm) in commercial invoice
• Confirm not 'razor blade steel' per note (d) if thin dimensions
• Segregate from higher carbon billets to avoid blending penalties
Related Products under HTS 7207.19.00.30
1.5 Inch Diameter Low Carbon Steel Billet
A semifinished product of nonalloy steel with less than 0.25% carbon content, featuring a circular cross section measuring 1.5 inches in diameter. Used primarily as feedstock for forging, rolling, or extrusion into finished steel products like bars and rods. Classified under HTS 7207.19.00.30 due to its low carbon composition and circular billet form.
100mm Round Low Carbon Steel Bloom
Circular semifinished steel bloom with 100mm diameter, made from nonalloy steel containing under 0.25% carbon. Typically hot-rolled and used for manufacturing structural shapes or plates. Fits HTS 7207.19.00.30 as a low-carbon, circular cross-section semifinished product.
4 Inch Circular Low Carbon Steel Ingot
Semifinished low carbon steel ingot (under 0.25% C) with precise 4-inch circular cross section, suitable for remelting or direct hot working. Common in steel mills for producing wire rods or seamless tubes. HTS 7207.19.00.30 applies to its nonalloy, low-carbon, circular semifinished nature.
75mm Diameter Nonalloy Steel Round
75mm diameter round semifinished product from low-carbon nonalloy steel (<0.25% C), used in extrusion processes for bars and profiles. Meets exact criteria of HTS 7207.19.00.30 for circular cross-section semifinished steel.
2 Inch Low Carbon Circular Billet
Standard 2-inch diameter circular billet of nonalloy steel with carbon content below 0.25%, ideal for continuous casting into merchant bars. Classified precisely under HTS 7207.19.00.30 for its semifinished form and specifications.
50mm Round Low Carbon Steel Semifinished
50mm circular cross-section semifinished low carbon nonalloy steel product (<0.25% C), used for forging automotive parts. HTS 7207.19.00.30 covers this exact description per tariff hierarchy.