Structural Steel Feedstock Billet
Rectangular billet nonalloy steel <0.25% C, narrow width profile (<4x thick), for structural beam production. HTS 7207.12.0010 captures this precise semifinished category. Key material for construction I-beams.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If universal mill plates produced
Rolled into specific plate dimensions per note (b).
If square geometry
Square cross-section statistical category within same heading.
If alloy delivery condition
Alloy semifinished with heat treatment shifts to 72.28.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify freedom from high-strength steel minimum yield requirements
• Separate from concrete reinforcing precursors to avoid mix-ups
• Document as not for retail sale or further worked
Related Products under HTS 7207.12.00.10
Machine Parts Billet Low Carbon Rectangular
Special rectangular low-carbon nonalloy steel billet (width <4x thickness) for machining/forging machine components. Fits HTS 7207.12.0010 semifinished criteria excluding slabs/squares. Ensures clean starting material for precision parts.
Extrusion Billet Nonalloy Steel Narrow
Narrow rectangular nonalloy steel billet <0.25% carbon for aluminum-like extrusion processes adapted for steel. HTS 7207.12.0010 for rectangular <4:1 ratio semifinished. Used in custom profile manufacturing.
Low-Carbon Steel Billet for Forging
A semifinished rectangular billet of nonalloy steel containing less than 0.25% carbon, with a width less than four times its thickness, used primarily for hot forging applications. This product falls under HTS 7207.12.0010 due to its rectangular cross-section and specific width-to-thickness ratio, distinguishing it from square billets or wider slabs. It is typically produced by continuous casting and requires further processing into finished shapes.
Nonalloy Steel Bloom for Rolling
Rectangular bloom of iron or nonalloy steel with <0.25% carbon, width under four times thickness, intended for hot rolling into plates or sections. Classified in HTS 7207.12.0010 for its specific geometry excluding square or slab forms. These are cast products needing substantial reduction in further processing.
Rectangular Steel Ingot Low Carbon
Cast rectangular ingot of nonalloy steel under 0.25% carbon, with narrow width-to-thickness ratio less than 4:1, used as feedstock for extrusion or forging. HTS 7207.12.0010 applies to this non-square, non-slab geometry in semifinished form. Minimal working beyond casting keeps it semifinished.
Semifinished Steel Rectangular Section for Extrusion
Low-carbon (<0.25%) nonalloy steel in rectangular form with width less than four times thickness, designed for extrusion into profiles. This HTS 7207.12.0010 classification captures its semifinished state and precise cross-section specs. Commonly used in structural component manufacturing.