Water Atomized Steel Powder for MIM Feedstock
Water-atomized 316L stainless substitute powder for Metal Injection Molding (MIM) of precision components. While stainless-like composition, classified as 'other' steel powder under 7205.29.00.00 if not meeting exact stainless criteria. 15-45 micron size for MIM processing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If confirmed stainless steel composition
≥10.5% chromium by weight shifts to stainless steel powders specifically
If further worked with organic binders
Powder mixed with binders for MIM classified as worked bars/rod shapes
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit full chemical analysis to confirm stainless threshold (10.5%+ Cr required),Declare flow rate and packing density specs typical for MIM processing,Document pre-alloyed vs. admixed powder type affecting classification
Related Products under HTS 7205.29.00.00
Iron Powder for 3D Metal Printing
Finely milled iron powder used in selective laser sintering (SLS) for additive manufacturing of metal parts. Classified under HTS 7205.29.00.00 as powders of iron not meeting specific alloy definitions in Chapter 72 notes. Particle size typically 15-45 microns for optimal layer fusion.
Atomized Steel Powder for Sintered Brake Pads
Water-atomized low-alloy steel powder used in powder metallurgy for automotive brake pad production. Falls under HTS 7205.29.00.00 as 'other' iron/steel powders not meeting high-strength or tool steel definitions. Typical composition: 0.5% C, balance Fe with trace elements.
Reduced Iron Powder for Welding Electrodes
Hydrogen-reduced iron powder serving as flux carrier in coated welding electrodes. Classified under 7205.29.00.00 due to high purity (>99% Fe) and spherical morphology from reduction process. Particle size range: 45-150 microns for optimal coating adhesion.
Carbonyl Iron Powder for Microwave Absorbers
Ultra-pure carbonyl process iron powder (<0.1% impurities) used in radar-absorbing materials and magnetic composites. Particle size 3-10 microns enables high surface area for EM absorption. HTS 7205.29.00.00 as other iron powder not meeting alloy definitions.
Spiegeleisen Powder for Specialty Castings
High-manganese spiegeleisen powder used as master alloy addition in ductile iron foundries. Contains 20-30% Mn, 4-6% C fitting spiegeleisen definition. Ground to 100-200 micron for injection molding into ladles.
Iron Powder for Powder Metallurgy Gears
Commercially pure iron powder for press-and-sinter gear production in automotive transmissions. Density 6.8-7.2 g/cc after sintering, annealed for machinability. Standard -100/+325 mesh size for gear compaction.