High-Strength Low-Alloy Steel Powder
HSLA steel powder meeting US note (a) high-strength criteria (yield >355 MPa for ≥3mm equivalent, adapted for powder), used in automotive structural parts. HTS 7205.21.00.00 as alloy steel powder with niobium/vanadium microalloying. 45-150 micron size.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If yield strength below high-strength thresholds
Standard carbon steels without specified minimum yield classify as non-alloy.
If pre-alloyed specifically for motor vehicle body parts
Powder designed exclusively for vehicle bodies may classify as parts thereof.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Test and certify minimum yield point per US note (a); document as not concrete reinforcing per note (c); automotive suppliers need IATF 16949 quality system proof
Related Products under HTS 7205.21.00.00
Heat-Resisting Steel Powder
Alloy steel powder per US note (g): <0.3% C, 4-10.5% Cr for furnace components and heat exchangers. HTS 7205.21.00.00 as defined alloy steel. Vacuum-atomized, 50-200 micron.
AISI 4340 Alloy Steel Powder
Fine powder made from AISI 4340 nickel-chromium-molybdenum alloy steel, used in additive manufacturing and metal injection molding. Classified under HTS 7205.21.00.00 as it consists of granules and powders of alloy steel, meeting the chapter's definition for steel alloys with specified elements. Particle size typically ranges from 15-45 microns for optimal sintering.
17-4 PH Stainless Steel Powder
Precipitation-hardening stainless steel powder (17% chromium, 4% nickel) used for aerospace components via selective laser melting. Falls under HTS 7205.21.00.00 as alloy steel powder per chapter definitions for chromium-containing steels. Typically spherical particles of 15-53 micron size.
Tool Steel H13 Powder
H13 hot-work tool steel powder (chromium-molybdenum alloy) for die casting and forging tooling via powder metallurgy. HTS 7205.21.00.00 applies as it meets tool steel definition in US note (e) with >1.2% carbon and >10.5% chromium equivalent composition. Gas-atomized for uniform 20-100 micron particles.
Inconel 718 Alloy Steel Powder
Nickel-chromium superalloy powder (Inconel 718) used in turbine blades and high-temperature aerospace parts. Classified HTS 7205.21.00.00 as alloy steel powder despite high nickel, based on iron-base composition meeting chapter alloy criteria. Fine spherical powder, 15-45 microns.
Maraging Steel Grade 250 Powder
Maraging steel C250 powder (18% nickel, cobalt, molybdenum alloy) for rocket motor cases and precision tooling. HTS 7205.21.00.00 as alloy steel powder with ultra-high strength after aging heat treatment. Atomized to 20-60 micron size.