Cut Pressure Vessel Plate Scrap
Reject plates and trimmings from ASME pressure vessel fabrication, SA-516 Grade 70 normalized steel, 1-4 inch thick. Classifies under HTS 7204.49.00.60 as cut plate scrap for remelting, excluding finished vessels. Normalized microstructure aids melting efficiency.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If railway structural origin
Rail origin structural scrap requires specific statistical reporting.
If representing tank heads
Vessel components retain tank classification until fully scrapped.
If alloy grades exceeding limits
High alloy pressure vessel scrap moves to alloy headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Retain ASME material certificates; limit piece size to 1x1 meter max; remove any weld-repaired sections which may classify as fabricated
Related Products under HTS 7204.49.00.60
Building Girder End Cut Scrap
Precision-cut ends from wide flange steel girders used in high-rise construction, ASTM A992 grade, 12-24 inch depths. HTS 7204.49.00.60 designation for structural building scrap intended for remelting into new beams. Free of attachments or concrete encasement.
Demolition Crane Boom Scrap
Cut sections from lattice crane booms, high-strength S690QL steel quenched and tempered, typical 300mm flange width. HTS 7204.49.00.60 applies to this torch-cut structural scrap for rerolling. Quench-hardened properties enhance scrap value.
Offshore Platform Leg Scrap
Cut cylindrical and box sections from decommissioned oil platform legs, API 2W Grade 50 weather-resistant steel. Structural scrap under HTS 7204.49.00.60 for marine remelting operations. Corrosion-resistant alloying elements noted.
Cut Transmission Tower Scrap
Angle iron and lattice sections cut from retired electrical transmission towers, ASTM A572 Grade 65 high-strength low-alloy steel. HTS 7204.49.00.60 structural scrap designation for utility recycling programs. Galvanized coating typically stripped.
Steel Mill Ladle Shroud Scrap
Cut refractory-lined plate fragments from continuous casting ladle shrouds, killed structural steel backing plate. Recycled under HTS 7204.49.00.60 as cut plate scrap despite casting equipment origin. Refractory must be separated.
Cut Storage Tank Bottom Scrap
Floor plate sections cut from decommissioned petroleum storage tanks, ASTM A36 mild steel, 1/2 inch thick with rolled edges. HTS 7204.49.00.60 for cut plate tank scrap destined for rerolling. Tank bottoms yield clean plate scrap.