No. 2 HMS Cast Steel Piping Scrap
Heavy melting scrap from cast steel pipes and fittings from industrial piping systems, prepared to No. 2 specs with no attachments. Classified under 7204.49.00.40 for remelting scrap ingots due to conforming size and heavy section requirements.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If in shredded form
Shredded preparation moves to specific shredded scrap subheading.
If complete pipe fittings
Assembled pipes classified as tubes rather than scrap.
If semi-finished products
Ingots/blooms not reduced to scrap quality classified as semi-finished steel.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Remove all plastic/rubber attachments; customs scans for non-metallics
• Provide chemical analysis showing carbon steel composition; avoid high-alloy misclassification
• Use ventilated containers to prevent condensation/rust claims (no duty allowance per notes)
Related Products under HTS 7204.49.00.40
No. 2 HMS Industrial Machinery Casting Scrap
Heavy steel castings from failed industrial machinery components, processed to standard No. 2 heavy melting dimensions. Fits 7204.49.00.40 as specified remelting scrap without deformations beyond size limits.
No. 2 Heavy Melting Steel Scrap (Bundled)
Bundles of mixed iron and steel scrap consisting of new black steel sheet and plates, structural shapes, and black steel castings up to 36 inches in any outside dimension, with a minimum 1/4 inch thickness and maximum 18 inches in any outside dimension. Classified under HTS 7204.49.00.40 as No. 2 heavy melting scrap due to its specific size, thickness, and composition standards for remelting purposes.
No. 2 HMS Steel Structural Shapes Scrap
Heavy melting scrap from demolished steel beams, channels, and angles, cut to 18-inch maximum dimensions and at least 1/4 inch thick, primarily low-alloy carbon steel. Fits HTS 7204.49.00.40 as standard No. 2 heavy melting scrap for electric arc furnace remelting.
No. 2 Heavy Melting Black Steel Plate Scrap
Scrap from uncoated black steel plates used in shipbuilding, cut to required dimensions (1/4-18 inches), free of sheet clippings or galvanized material. HTS 7204.49.00.40 applies as it matches the precise definition of No. 2 heavy melting ferrous scrap.
No. 2 Heavy Melting Shipbreaking Scrap
Steel scrap from ship hull plates and frames recovered during shipbreaking, cut and sized to 36-inch maximum with 1/4-inch minimum thickness. Meets HTS 7204.49.00.40 criteria as No. 2 heavy melting scrap suitable for remelting.
No. 2 HMS Black Sheet Steel Scrap
New production black steel sheet scrap from stamping operations, meeting heavy melting thickness and dimension specs without coatings. HTS 7204.49.00.40 designation for this remelting-grade ferrous waste.