Ferrosilicon Titanium 45% Titanium
A ternary ferroalloy composed of iron, silicon, and approximately 45% titanium, used in steelmaking for deoxidation and grain refinement. Falls under HTS 7202.91.00.00 as ferrosilicon titanium per the tariff heading. Commonly produced via aluminothermic reduction and supplied in irregular lumps.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If silicon content dominates and titanium is minimal
Ferrosilicon with low titanium classifies under silicon-dominant ferroalloys, changing the heading.
If in powdered form for chemical rather than metallurgical use
Carbides or powdered alloys may shift to inorganic chemicals if not presented as metallurgical additives.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Require chemical analysis certificates specifying Fe-Si-Ti ratios to distinguish from plain ferrosilicon under 7202.21
• Check for proper packaging to prevent moisture absorption, which can cause handling issues at ports
Related Products under HTS 7202.91.00.00
High-Purity Ferrotitanium Lumps
Ferrotitanium alloy lumps with over 65% titanium purity, low impurities, ideal for specialty steel grades like aerospace components. HTS 7202.91.00.00 covers this ferroalloy used in electric arc furnaces for titanium addition. Not further worked beyond basic casting.
Low-Carbon Ferrotitanium Alloy
Ferrotitanium with controlled low carbon (<0.1%) for nitriding-resistant steels, around 40% Ti content. HTS 7202.91.00.00 applies to this ferroalloy variant. Used in automotive exhaust components.
65% Ferrosilicon Titanium Lumps
Ferrosilicon titanium lumps with 65% Ti, 20% Si, balance Fe, for high-silicon specialty steels. HTS 7202.91.00.00 explicitly includes ferrosilicon titanium. Essential for electrical steels.
Ferrotitanium Powder 200 Mesh
Atomized ferrotitanium powder (-200 mesh, 45% Ti) for powder metallurgy and thermal spraying. Still HTS 7202.91.00.00 as not further worked beyond atomization for ferroalloys. Used in wear-resistant coatings.
Ferrotitanium 70% Titanium Alloy
Ferrotitanium containing approximately 70% titanium and 30% iron, used primarily as a master alloy in steel production to enhance strength and corrosion resistance. Classified under HTS 7202.91.00.00 as it meets the definition of ferrotitanium, a ferroalloy combining iron with titanium. Typically supplied in lumps or granules for metallurgical applications.
Ferrotitanium Granules 30-70% Ti
Granulated ferrotitanium with 30-70% titanium content, sized 3-10mm for easy dissolution in molten steel baths. Specifically classified under 7202.91.00.00 as ferrotitanium. Enhances weldability in structural steels.