FeCr 60C High Carbon Ferrochrome Lumps
Ferrochrome lumps with 60% minimum chromium and 5-8% carbon, produced by carbothermic reduction for stainless and specialty steel alloys. Meets HTS 7202.49.50.10 criteria as other ferrochromium with >0.5% carbon. Particle size typically 10-100mm for furnace feeding.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If containing >30% silicon
Ferrosilicon-chromium classification based on silicon dominance.
If primarily ferrosilicomanganese instead
Different base metal alloy changes ferroalloy heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Declare precise sizing and composition to avoid reclassification; use proper ventilation for dust during handling; ensure no 'further worked' surface treatments per Chapter 72 note
Related Products under HTS 7202.49.50.10
Charge Chrome (68C)
Charge grade ferrochrome with approximately 68% chromium and over 6% carbon, designed for electric arc furnace steelmaking. Classified under HTS 7202.49.50.10 due to its high carbon content exceeding 0.5% by weight in ferrochromium category. Commonly used in bulk for carbon and chromium addition.
HC FeCr 66% Chromium Grade
High-carbon ferrochrome grade with 66% Cr and 6-8% C, essential for producing 200 and 300 series stainless steels. Falls under HTS 7202.49.50.10 as ferrochromium >0.5% carbon, excluding silicon-rich variants. Delivered in standard metallurgical lump sizes.
Carbon Ferrochrome for Tool Steel
Ferrochromium alloy with >4% carbon and 65-70% chromium, specifically blended for tool steel manufacturing requiring high hardness. Classified in HTS 7202.49.50.10 for high-carbon ferrochromium content. Used in small additions for precise alloy control.
FeCrHC 70% Chromium Lumpy
70% chromium high-carbon ferrochrome in lumpy form with 7-9% carbon, optimized for submerged arc furnace recovery. HTS 7202.49.50.10 applies to this other ferrochromium >0.5% carbon. Key ingredient for corrosion-resistant steels.
Standard HC Ferro Chrome 4-10% C
Standard high-carbon ferrochrome containing 4-10% carbon and 60-72% chromium for general stainless steel melting. Fits HTS 7202.49.50.10 as ferrochromium with >0.5% carbon by weight. Produced via smelting chromite ore with coke reductant.
South African Charge Grade FeCr
South African origin charge chrome with >6% carbon, 64-68% Cr, major global supplier for electric furnace steel production. Classified HTS 7202.49.50.10 for high-carbon ferrochromium. Known for consistent high recovery rates.