FeCrC 68% High-Carbon Ferrochrome Lumps
Ferrochromium lumps with 68% Cr and 4-6% carbon, supplied in 20-150mm size for electric arc furnace use in stainless steel. Meets HTS 7202.49.10.00 criteria for >3% carbon ferrochromium, essential for cost-effective chromium addition. Produced from South African or Indian chromite sources typically.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If extraterritorial low-carbon production
Specific statistical breakout for certain low-carbon FeCr regardless of carbon if specially produced.
If containing carbides as primary form
Pure chromium carbides classified under inorganic chemicals rather than ferroalloys.
If chromium ores rather than reduced alloy
Unreduced chromite ore stays in Chapter 26; reduction to ferroalloy moves to Chapter 72.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include origin certificates as anti-dumping duties may apply to certain countries like India or Kazakhstan
• Test for harmful elements (P, S <0.04%) and document to meet steel mill specifications and CBP requirements
Related Products under HTS 7202.49.10.00
Charge Grade High-Carbon Ferrochrome (FeCrC 64%)
Charge chrome ferroalloy containing 64-66% chromium and 5-8% carbon, designed for furnace charging in steelmaking. Classified under HTS 7202.49.10.00 for ferrochromium alloys over 3% carbon, used to introduce chromium without excessive melting energy. Lumpy form typical for foundry applications.
Foundry Grade High-Carbon Ferrochrome (FeCrC 60%)
High-carbon ferrochrome optimized for foundry cast iron with 60% Cr and >4% carbon to promote graphite formation. Falls under HTS 7202.49.10.00 as other ferrochromium >3% carbon, in smaller lump sizes for melting efficiency. Enhances hardness and wear resistance in castings.
Stainless Steel Grade HC Ferrochrome (FeCr 70C)
Premium high-carbon ferrochrome for 300-series stainless with 70% Cr, 5% C, low P/S. Specifically under HTS 7202.49.10.00 for >3% C ferrochromium, optimized for AOD refining. Critical for corrosion-resistant steel production.
South African HC Ferrochrome Lumps 10-100mm
South African origin high-carbon ferrochrome lumps sized 10-100mm, 66% Cr min, 6% C typical. HTS 7202.49.10.00 for ferrochromium >3% carbon, world's largest supplier for global stainless production. Bushveld complex chromite derived.
High-Carbon Ferrochrome (FeCrC 70%)
High-carbon ferrochrome with approximately 70% chromium and over 3% carbon content, used primarily as an alloying additive in stainless steel production. This ferroalloy falls under HTS 7202.49.10.00 due to its ferrochromium composition exceeding 3% carbon by weight, distinguishing it from low-carbon variants. It is produced by smelting chromite ore with carbon in electric arc furnaces.
HC FeCr 65C High-Carbon Ferrochrome Fines
Crushed fines of high-carbon ferrochrome with 65% Cr and 6-8% C, used in powder metallurgy or as recarburizer. HTS 7202.49.10.00 applies to ferrochromium >3% carbon in any form except coils/patterns. Fines offer faster dissolution in ladle additions.