FeSiMn Powder -200 Mesh for Welding
Atomized ferrosilicon manganese powder passing 200 mesh sieve, used in flux-cored welding wires and metal powder production. Remains classified under HTS 7202.30.00.00 as ferrosilicon manganese, as powdering doesn't constitute 'further working' per Chapter 72 notes unless chemically coated.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If silicon-dominant (>30% Si, <10% Mn)
Ferrosilicon powders classified by silicon primacy under 7202.29, not manganese content.
If bound into electrodes or coated for welding use
Finished welding electrodes/products move from raw ferroalloys to Chapter 83.
If chemically treated with fluxes or binders
Chemical surface treatments constitute 'further working' per Chapter 72 note, shifting to Chapter 38.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Classify as UN3178 flammable solid if <100 micron; requires special packaging and MSDS declaration
• Provide granulometry reports confirming -200 mesh (74 micron) to distinguish from coarser granular forms
• Anti-dumping deposits required for China-origin FeSiMn powder; verify via ACCESS system before booking
Related Products under HTS 7202.30.00.00
Standard Ferrosilicon Manganese FeSiMn65Si17
Ferrosilicon manganese with approximately 65% manganese, 17% silicon, and balance iron, produced by reducing a mixture of manganese ore, quartz, and iron in an electric arc furnace. This alloy falls under HTS 7202.30.00.00 as it is specifically classified as ferrosilicon manganese, a ferroalloy used primarily as a deoxidizer and alloying agent in steel production to improve strength and castability.
High-Silicon Ferrosilicon Manganese FeSiMn68Si20
A grade of ferrosilicon manganese containing 68% manganese and 20% silicon, used in the production of low-carbon steels and stainless steels. Classified under HTS 7202.30.00.00 as ferrosilicon manganese, it simultaneously supplies manganese for desulfurization and silicon for deoxidation during steelmaking.
Medium-Carbon Ferrosilicon Manganese FeSiMn70Si14C1.5
Ferrosilicon manganese alloy with 70% manganese, 14% silicon, and 1.5% carbon, commonly used in welding electrodes and structural steel production. This product is definitively ferrosilicon manganese under HTS 7202.30.00.00, serving dual roles as both alloying addition and deoxidizer.
FeSiMn Lumps 10-50mm Grade A
Ferrosilicon manganese in lump form sized 10-50mm, standard Grade A with 65% min manganese and 16% min silicon. Used in steel foundries for simultaneous deoxidation and manganese addition; classified as ferrosilicon manganese under HTS 7202.30.00.00 per Chapter 72 ferroalloy definitions.
Premium FeSiMn 75Si17 for Stainless Steel
High-manganese ferrosilicon manganese with 75% Mn and 17% Si, specially produced for 300-series stainless steel melting. HTS 7202.30.00.00 classification applies as standard ferrosilicon manganese meeting Chapter 72 ferroalloy definitions without tool steel or other special compositions.
FeSiMn Briquettes 50kg for Foundries
Ferrosilicon manganese compressed into 50kg briquettes for easier handling in small foundries, composition 65% Mn / 17% Si. Still classified as ferrosilicon manganese under HTS 7202.30.00.00 since briquetting is physical forming, not chemical 'further working' per Chapter notes.