Standard HCFeMn Lumps (1.6% Carbon)
Standard high-carbon ferromanganese lumps averaging 1.6% carbon, produced for general steel alloying purposes. Falls squarely under HTS 7202.19.50.00 as 'other' ferromanganese with 1-2% carbon per chapter definitions. Key ingredient for structural steel production.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If silicon content exceeds 18 percent
High silicon ferromanganese qualifies as silicomanganese under specific composition rules.
If electrically insulated
Further worked ferroalloys with electrical insulation become electrical machines parts.
If blended with fluxes
Mixtures with chemical additives for foundry use shift to chemical preparations.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify supplier's ISO certifications; use ventilated containers for off-gassing; track Section 232 steel tariffs applicability
Related Products under HTS 7202.19.50.00
High-Carbon Ferromanganese Lumps (1.5% Carbon)
Ferromanganese lumps containing approximately 1.5% carbon by weight, used primarily as an alloying additive in steel production to enhance manganese content and deoxidize molten steel. This product falls under HTS 7202.19.50.00 because it is ferromanganese with carbon content between 1% and 2%, distinguishing it from higher or lower carbon variants. Typically produced by smelting manganese ore with coke in electric arc furnaces.
Medium-Carbon Ferromanganese Briquettes (1.2% Carbon)
Briquetted ferromanganese with 1.2% carbon content, compacted for easier handling and transport in steel foundries. Classified under HTS 7202.19.50.00 due to its ferromanganese composition and carbon level exceeding 1% but not 2%. Ideal for precise alloy additions in ladle metallurgy.
Ferromanganese Granules (1.8% Carbon)
Granular ferromanganese alloy with 1.8% carbon, sized 3-10mm for rapid dissolution in steel melts. This ferroalloy is specifically under HTS 7202.19.50.00 for its carbon content range in the 'other' ferromanganese category. Commonly used in continuous casting operations.
Low-Medium Carbon Ferromanganese Powder (1.1% Carbon)
Powdered ferromanganese at 1.1% carbon, milled for injection systems in secondary steelmaking. HTS 7202.19.50.00 applies to this form as the carbon specification governs over physical state within ferromanganese. Enhances steel hardenability and strength.
Ferromanganese Chips (1.4% Carbon)
Chipped ferromanganese remnants with 1.4% carbon content, recycled for secondary alloying additions. Classified in HTS 7202.19.50.00 based on chemical composition despite processing form. Economical option for small-batch steelmakers.