HCFeMn Granules 3% Carbon
Granulated high-carbon ferromanganese with precisely 3% carbon, sized 3-10mm for continuous casting steel production. This ferroalloy meets HTS 7202.11.10.00 criteria for ferromanganese carbon content between 2-4%. Offers rapid dissolution in molten steel.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ferrochrome instead
Chromium-dominant alloys classify under separate ferrochrome headings.
If roasted or calcined
Thermal processing changes classification to roasted ores.
If pig iron based
Pig iron with manganese qualifies under non-alloy pig iron if carbon dominant.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Granule size uniformity critical; declare sieve analysis in entry documents
• Moisture content under 0.1% required to prevent explosion risks in electric arc furnaces
• Obtain origin certificates proving non-conflict minerals sourcing
Related Products under HTS 7202.11.10.00
High-Carbon Ferromanganese Lumps
Ferromanganese lumps containing 3.5% carbon by weight, used primarily as an alloying additive in steel production to improve hardenability and strength. This product falls under HTS 7202.11.10.00 because it is ferromanganese with carbon content between 2% and 4%. Typically supplied in lump form ranging from 10-100mm for furnace charging.
Medium-Carbon Ferromanganese Briquettes
Briquetted ferromanganese with 2.8% carbon content, compacted for easier handling and reduced dust in steel ladle additions. Classified under HTS 7202.11.10.00 due to its ferromanganese composition and carbon level of more than 2% but not exceeding 4%. Common in foundries for precise alloy control.
Ferromanganese 75% Mn 2.5% C Lumps
Standard 75% manganese ferromanganese lumps with 2.5% carbon, produced via submerged arc furnace for basic steel desulfurization. Falls under HTS 7202.11.10.00 as medium-carbon ferromanganese. Size typically 25-75mm for blast furnace use.
Blast Furnace HC Ferromanganese
Blast furnace produced high-carbon ferromanganese averaging 3.2% carbon, used in stainless steel melting. Classified HTS 7202.11.10.00 for carbon content 2-4% in ferromanganese form. Irregular lump shape from tapping process.
Refined HCFeMn 2.2% Carbon
Refined high-carbon ferromanganese with 2.2% carbon and low phosphorus (0.2%), optimized for high-quality steel. Meets HTS 7202.11.10.00 for ferromanganese carbon specification. Supplied in 50kg bags or bulk.
Ferromanganese Fines 3.8% C
Crushed ferromanganese fines (<6mm) with 3.8% carbon content, recycled from lump production for ladle metallurgy. HTS 7202.11.10.00 applies to this carbon-range ferromanganese regardless of size. Dust suppression treated.