Platinum Investment Nuggets

Small, irregular nuggets of pure platinum metal, typically weighing between 1/10 oz and 1 oz, used primarily by investors for bullion purchases. These qualify under HTS 7110.11.00.10 as 'grain and nuggets of the metal platinum' because they are unwrought forms, not processed into bars, sheets, or other semimanufactured shapes. Purity is usually 99.95% or higher, certified by refiners like Johnson Matthey.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+25.0%25%
🇲🇽MexicoFreeFree
🇨🇦CanadaFreeFree
🇩🇪GermanyFreeFree
🇯🇵JapanFreeFree

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

7110.19.00.00Same rate: 25%

If alloyed with <2% platinum or containing other PGMs like palladium

Per note 5, alloys with less than 2% platinum or predominated by other PGMs classify as other platinum-group metals, not pure platinum.

7110.41.00Same rate: 25%

If in powder form passing 90% through 0.5mm sieve

Subheading note defines powder strictly; nuggets are solid unwrought, but fine grains meeting sieve test shift to powder classification.

2616Lower: 10% vs 25%

If imported as platinum-bearing ore or concentrate

Unrefined platinum in ore form falls under Chapter 26 for metal ores, not refined unwrought metal in Chapter 71.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Obtain a certificate of analysis confirming platinum purity exceeds 99.9% and absence of platinum group metals like iridium per chapter note 2(b)

Declare exact weight and form (nuggets/grains) on commercial invoice; misclassification as powder (90% <0.5mm sieve) leads to audits

Comply with CPSC precious metal marking rules if for retail; bulk investment forms exempt but verify FINCEN reporting for values over $10,000

Related Products under HTS 7110.11.00.10

Platinum Grain for Jewelry Casting

Granular platinum grains (1-3mm irregular shapes) melted down by jewelers for custom casting of rings and settings. Classified in HTS 7110.11.00.10 as unwrought grains of platinum metal, distinct from powder due to larger particle size not meeting the 0.5mm sieve threshold. Sourced from refineries, hallmarked with serial numbers for traceability.

1 Gram Platinum Nugget Specimen

A single 1-gram natural-shaped platinum nugget sold to collectors and investors as a specimen of native platinum. Falls under HTS 7110.11.00.10 for unwrought grain/nuggets, unwrought meaning not manufactured into standard shapes like bars. Often encased in plastic for display, with purity stamped at 99.95%.

Platinum Placer Nuggets

Naturally occurring platinum nuggets extracted from alluvial deposits in the Ural Mountains or Alaska, minimally processed by washing. These raw grains/nuggets fall under HTS 7110.11.00.10 as unwrought platinum metal for refiners. Contain minor PGM impurities but classified by predominant platinum.

Recycled Platinum Melt Nuggets

Nuggets produced by remelting jewelry scrap and dental alloy into unwrought form for redistribution to fabricators. HTS 7110.11.00.10 applies to these pure platinum grains, treated identically to primary metal per tariff rules. Certified recycled content appeals to ESG-focused buyers.

Platinum Sponge Nuggets

Porous nuggets formed from platinum sponge, a intermediate refining product consolidated into larger unwrought lumps for remelting. HTS 7110.11.00.10 covers these as grains/nuggets of platinum metal, provided not further processed into powder or sheet. Used in chemical catalysis and electronics manufacturing.

10 Ounce Platinum Nugget

Large 10 troy ounce irregular platinum nugget marketed to high-net-worth investors and central banks as store of value. Pure unwrought platinum qualifies for HTS 7110.11.00.10 as nuggets, assayed and serialized by mints like PAMP Suisse. Larger size distinguishes from standard cast bars.