Electrically Nonconductive 9.8 Micron Fiberglass Tire Ply Fabric
Mechanically bonded, non-colored woven fabric of 9.8-micron nonconductive fiberglass filaments with RFL impregnation for tire ply reinforcement and adhesion to polymers. Precisely matches HTS 7019.69.30.00 for tire cord applications. Enhances tire strength in passenger vehicles.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not specifically for tire cord adhesion
General 'other' woven fiberglass fabrics without RFL/polymer adhesion spec go to 7019.59.
If considered mineral wool per chapter note
Fails glass wool silica specs in chapter note, but non-compliant wools go to 6806; this is pure fiberglass filaments.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Test for electrical nonconductivity per specs; conductive variants may shift to industrial textile codes
• Document weave density and RFL uptake percentage to prevent undervaluation disputes
Related Products under HTS 7019.69.30.00
RFL Impregnated Fiberglass Tire Cord Fabric 9.5 Microns
This is a woven fabric made from continuous electrically nonconductive fiberglass filaments measuring 9.5 microns in diameter, impregnated with resorcinol formaldehyde latex (RFL) treatment to enhance adhesion to rubber compounds in tires. It falls under HTS 7019.69.30.00 due to its specific filament size (9-11 microns), mechanical bonding, non-colored nature, and RFL impregnation designed for tire reinforcement. Primarily used as a carcass or belt material in radial passenger car tires.
9 Micron RFL Treated Fiberglass Cord Fabric for Tires
Woven tire cord fabric from 9-micron diameter continuous nonconductive fiberglass filaments, treated with resorcinol formaldehyde latex for optimal bonding in rubber tire construction. Classified in HTS 7019.69.30.00 for its exact filament specs, lack of color, and specific RFL impregnation not amounting to full rubberization. Used in high-strength tire plies for automotive applications.
10.5 Micron Non-Colored Fiberglass Tire Reinforcement Fabric
Electrically nonconductive continuous fiberglass filament fabric (10.5 microns) woven and impregnated with RFL latex for adhesion in polymeric tire compounds. HTS 7019.69.30.00 applies to this uncolored, mechanically bonded product with filament size tailored for tire durability. Ideal for radial truck tire belts.
11 Micron RFL Impregnated Tire Cord Glass Fabric
Precision-woven fabric from 11-micron continuous nonconductive fiberglass filaments, RFL-treated for rubber adhesion in tire production. Meets HTS 7019.69.30.00 criteria: 9-11 micron range, non-colored, mechanically bonded, and specifically for polymeric compound adhesion. Used in performance car tires.