Pigmented Textile-Grade Glass Roving Woven Fabric

Closed woven mechanically bonded fabric of pigmented textile-grade glass rovings for apparel reinforcement and upholstery. HTS 7019.61.90 for other colored variants. Balances strength with flexibility for textile end-uses.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
๐Ÿ‡จ๐Ÿ‡ณChina7%+17.5%24.5%
๐Ÿ‡ฒ๐Ÿ‡ฝMexico7%+10.0%17%
๐Ÿ‡จ๐Ÿ‡ฆCanada7%+10.0%17%
๐Ÿ‡ฉ๐Ÿ‡ชGermany7%+10.0%17%
๐Ÿ‡ฏ๐Ÿ‡ตJapan7%+10.0%17%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

5407.61.99Higher: 49.9% vs 24.5%

If synthetic fibers exceed glass content

Woven synthetic fabrics with minor glass classify by predominant material in Chapter 54.

7019.61Same rate: 24.5%

If over 30.48cm wide in continuous rolls

Specific width provisions exist under certain 7019.61 subheadings for continuous lengths.

6307.90.98Same rate: 24.5%

If made up into other textile articles

Made-up textile articles from glass fibers complete in Chapter 63 take precedence.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

โ€ข Distinguish textile-grade from industrial by filament count and twist in technical data sheets

โ€ข Ensure no absorbent/reflecting layers per chapter notes that could shift to worked glass categories

โ€ข Retail vs. industrial packaging affects potential Chapter 63 made-up article classification

Related Products under HTS 7019.61.90

Colored Carbon Fiber Reinforced Polymer Prepreg Fabric

This mechanically bonded closed woven fabric made from colored glass fiber rovings is impregnated with resin to form a prepreg used in composite manufacturing. It falls under HTS 7019.61.90 as 'other' colored closed woven fabrics of rovings, distinct from uncolored or specific variants. The fabric's structure provides strength for aerospace and automotive applications.

Colored E-Glass Roving Woven Fabric for Wind Turbine Blades

A closed woven fabric of colored E-glass fiber rovings, mechanically bonded, designed for reinforcing wind turbine blade composites. Classified in HTS 7019.61.90 as 'other' colored variants of such fabrics. Its heavy roving construction provides high tensile strength for structural applications.

Pigmented S-Glass Fiber Roving Fabric for Marine Composites

Mechanically bonded closed woven fabric from pigmented S-glass rovings, used in boat hull reinforcement. It qualifies under HTS 7019.61.90 for other colored closed woven roving fabrics. Higher strength S-glass distinguishes it for demanding marine environments.

Colored AR-Glass Roving Woven Fabric for Concrete Reinforcement

Closed woven, mechanically bonded fabric of alkali-resistant (AR) colored glass rovings for reinforcing concrete and GRC panels. Falls under HTS 7019.61.90 as other colored roving fabrics. AR properties prevent degradation in alkaline cement environments.

Tinted ECR-Glass Roving Fabric for Pipe Reinforcement

Mechanically bonded closed woven fabric from tinted ECR (electrical/chemical resistant) glass fiber rovings for reinforcing pipes and tanks. Classified HTS 7019.61.90 as other colored roving fabrics. ECR properties suit corrosive chemical environments.

Dyed High-Strength Glass Roving Woven Fabric for Sporting Goods

Closed woven mechanically bonded fabric of dyed high-strength glass rovings used in sporting equipment like golf club shafts. HTS 7019.61.90 covers this other colored roving fabric. Provides lightweight strength for performance gear.