Glass CRT Neck Tube
A precision glass tube forming the neck section of cathode-ray tube envelopes, open at one end for electron gun insertion. Classified under HTS 7011.20.85 as an open glass part specifically for CRTs, excluding bulbs or complete envelopes. It lacks any fittings and is designed for vacuum sealing during tube assembly.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 5.2% | +35.0% | 40.2% |
| 🇲🇽Mexico | 5.2% | +10.0% | 15.2% |
| 🇨🇦Canada | 5.2% | +10.0% | 15.2% |
| 🇩🇪Germany | 5.2% | +10.0% | 15.2% |
| 🇯🇵Japan | 5.2% | +10.0% | 15.2% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If drawn or blown into continuous tubing before cutting to CRT length
Uncut glass tubing for further fabrication falls under tubes of fused quartz or other fused silica, not specific CRT parts.
If intended for incandescent electric lamps instead of CRTs
Glass envelopes or parts shift to subheading for lamp bulbs when not designed for cathode-ray tube technology.
If sold as part of a complete cathode-ray tube assembly
Assembled CRTs including glass envelopes classify as complete articles of other glass, outside raw envelope parts.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify dimensional tolerances and glass composition certifications to confirm CRT-specific design and avoid misclassification as general glass tubing
• Include manufacturer specs proving compatibility with cathode-ray tube electron guns; common pitfall is missing vacuum-rated documentation
• Ensure no attached fittings; declare as 'open glass parts for CRT' to prevent shifts to assembled lamp headings
Related Products under HTS 7011.20.85
Funnel-Shaped CRT Glass Cone
An open-ended funnel-shaped glass component that forms the conical body of CRT envelopes, connecting the faceplate to the neck. Falls under HTS 7011.20.85 as 'other' open glass parts for cathode-ray tubes, without fittings. Used in older TV and monitor production for electron beam focusing.
CRT Faceplate Glass Disk
A large, open circular glass disk serving as the front faceplate of cathode-ray tube envelopes, featuring anti-reflective coatings per chapter notes. HTS 7011.20.85 covers this as an 'other' open glass part without fittings for CRT light sources. Implodes under vacuum for phosphor screen attachment.
Open CRT Electron Gun Mount Tube
Glass tube segment open at both ends, designed to mount and seal the electron gun within CRT necks. Classified in HTS 7011.20.85 as other open glass parts for cathode-ray tubes, lacking external fittings. Ensures vacuum integrity in display tube assembly.
Phosphor Screen Carrier Glass
Thin, open glass substrate open at edges for depositing phosphor coatings in CRT manufacturing. HTS 7011.20.85 includes this as other glass parts of CRT envelopes without fittings. Provides luminescent surface for electron beam excitation.
CRT Implosion Band Glass Ring
Precision open glass ring component for securing CRT faceplates against implosion forces. Falls under HTS 7011.20.85 as other open glass parts of cathode-ray tube envelopes. Integrates with metal bands during final sealing.