Non-Reflecting Glass Sheet for Laptop Displays
High-transparency float glass, polished with reflecting layer for anti-glare, 3 mm thick, 0.75 m², tailored for laptop LCD screens. Under HTS 7005.29.14.10 for its LCD-specific design, thinness <5mm, and sheet area 0.65-0.8 m²; layer enhances reflection while keeping translucency as per chapter note (c).
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ≥5mm but <10mm thick
Thicker float glass sheets in the same LCD use but 5-10mm range shift to 7005.21 subheading.
If imported primarily as coated with pigments for tinting
Glass with substantial pigment coatings for color may classify as prepared pigments in Chapter 32.
If in strips or profiles, not full sheets
Glass in strip or rod form, even for LCDs, goes to 7006 per heading scope.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain certificates of analysis for layer composition to prove it meets 'absorbent/reflecting' definition
• Check for anti-dumping duties on float glass from certain origins; file correct scope rulings
• Use ISF filings early, specifying HTS and LCD end-use to avoid holds
Related Products under HTS 7005.29.14.10
LCD Glass Substrate for Smartphones
Thin float glass sheets, surface polished with a non-reflecting layer, measuring 0.4 m² and 0.65 mm thick, specifically engineered for liquid crystal displays in smartphones. Classified under HTS 7005.29.14.10 due to its suitability for LCDs, sheet form under 5 mm thick, and area between 0.65-0.8 m², without further working beyond polishing. It meets chapter notes as non-wired glass with a microscopically thin functional layer.
Polished Float Glass for Tablet LCD Screens
Surface-ground float glass sheets with absorbent layer, 1.2 mm thick and 0.7 m² area, designed for tablet computer LCD panels. Fits HTS 7005.29.14.10 as nonwired, <5mm thick glass suitable for LCDs over 0.65 m² but ≤0.8 m², retaining sheet character per heading notes. The thin metal oxide coating qualifies as an absorbent layer under chapter note (c).
Thin LCD Substrate Glass for TVs
Surface-polished nonwired float glass with non-reflecting coating, 4.5 mm thick and 0.78 m², for medium-sized TV LCD panels. Classified in HTS 7005.29.14.10 as suitable for LCDs, <5mm thick sheets over 0.65 m² to 0.8 m², not otherwise worked beyond annealing/polishing per chapter notes (a)-(b).
Anti-Glare Float Glass for Monitor Panels
Polished float glass sheets featuring a reflecting metal oxide layer for reduced glare, 2.8 mm thick, 0.72 m² area, optimized for computer monitor LCDs. Meets HTS 7005.29.14.10 criteria: LCD-suitable, nonwired, <5mm thick, 0.65-0.8 m² sheets with functional layer per chapter note (c).
Precision Polished Glass for Gaming Laptop LCDs
High-precision surface-ground float glass with infrared-absorbing layer, 1.8 mm thick and 0.69 m², for high-refresh-rate gaming laptop displays. HTS 7005.29.14.10 applies for its LCD end-use, thin sheet form (<5mm, 0.65-0.8 m²), and qualifying absorbent coating without other working.
Coated Float Glass Sheet for Portable Projector LCDs
Float glass sheets with chemical non-reflecting compound layer, polished, 3.2 mm thick, 0.71 m², for portable projector LCD chips. Fits precisely in HTS 7005.29.14.10 as nonwired LCD glass <5mm thick over 0.65 m² to 0.8 m², with translucency-retaining layer.