Thick Patterned Drawn Glass for Display Cases
6 mm thick rectangular drawn glass with subtle wire-reinforcing pattern, 0.22 m², for museum display case bottoms. HTS 7004.90.30.20 applies as it's blown/drawn sheet glass in rectangular shape over 5 mm thick, small area, without other workings. The pattern from drawing process doesn't count as 'worked'.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If float glass with colored coating
Float-produced glass with reflecting/absorbent layers over 3 mm thick goes to specific 7005 subheadings.
If surface etched or sandblasted
Surface texturing beyond drawing patterns constitutes working, moving to tempered/strengthened glass in 7007.
If set in cement for panels
Glass assembled with cement/fillers for building panels classifies as worked stone/glass articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document the drawing process and pattern origin to distinguish from rolled/figured glass which might fall elsewhere
• Measure area precisely excluding any handling notches; oversize pushes to 7004.90.35 or higher
Related Products under HTS 7004.90.30.20
Thick Drawn Glass Sheet for Industrial Tabletop
A rectangular drawn glass sheet measuring 10 mm thick, 0.25 m² in area, and 0.24 m² effective size, used for protective industrial tabletops. It falls under HTS 7004.90.30.20 as drawn glass in rectangular shape over 5 mm thick, not otherwise worked beyond annealing. The thickness exceeds 5 mm while staying within the specified small area limits for this subheading.
Heavy Drawn Glass Panel for Laboratory Counter
Rectangular panel of drawn glass, 8 mm thick, sized at 0.20 m² area for lab bench protection against chemicals. Classified in HTS 7004.90.30.20 due to its drawn production method, rectangular shape, thickness over 5 mm, and small area under 0.26 m² without further working. Ideal for durable, transparent work surfaces.
Drawn Glass Base Plate for Optical Bench
Precision rectangular drawn glass plate, 5.5 mm thick, 0.15 m², serving as stable base for optical experiment benches. HTS 7004.90.30.20 covers this as unworked blown/drawn sheet glass over 5 mm in small rectangular shape. Thickness provides rigidity for lab alignment.
Industrial Drawn Glass Shelf Insert 7 mm Thick
7 mm thick rectangular sheet of clear drawn glass, 0.18 m² area, designed as heavy-duty shelf inserts for machinery housings. Fits HTS 7004.90.30.20 for unworked drawn glass sheets over 5 mm thick in small rectangular format under 0.26 m². Provides robust transparency without additional processing.
Thick Wired Drawn Glass for Safety Partitions
9 mm thick wired drawn glass sheet, rectangular 0.24 m², for small safety partition panels in workshops. Classified under HTS 7004.90.30.20 as drawn glass with wire inclusion (not a working), over 5 mm thick, small area. Wire mesh enhances shatter resistance.