Oversized Blown Glass Sheet 2.9mm for Signage Backing
Blown glass sheet rectangular shape, 2.9mm thick, area over 0.58 m² for backing illuminated signs. HTS 7004.90.25.50 covers this as unworked blown glass in large sheets within thickness limits.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If non-reflecting layer for signage
Chemical coatings to reduce glare qualify as non-reflecting layer under 7006 per notes.
If made into sign tubes
Further blown into tubular shapes for neon signs becomes 7014 signaling glassware.
If acrylic substitute
Non-glass plastic sheets for signage fall under Chapter 39 polymers.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm no coatings applied; signage often has films which could shift classification
• Calculate area correctly excluding handles if any; pure sheet area counts
Related Products under HTS 7004.90.25.50
Drawn Soda-Lime Glass Sheet 2.5mm Thick Large Panel
A rectangular drawn glass sheet made from soda-lime composition, measuring 2.5mm in thickness and over 0.58 m² in area, suitable for industrial glazing or display cases. It falls under HTS 7004.90.25.50 as drawn glass in sheets, not otherwise worked, with specified dimensions exceeding 0.58 m². Cutting to shape does not affect classification per chapter notes.
Rectangular Blown Glass Sheet 3mm Thick Display Panel
A blown glass sheet in rectangular shape, 3mm thick and exceeding 0.58 m², used for retail display backings or picture framing. Classified in HTS 7004.90.25.50 as blown glass in sheets, not otherwise worked, meeting the thickness range of over 2 but not over 3.5 mm and large area criterion.
Industrial Drawn Glass Sheet 3.2mm Thick Bulk Pack
Bulk rectangular drawn glass sheets, each 3.2mm thick and over 0.58 m², for cutting into tabletops or shelves in furniture manufacturing. HTS 7004.90.25.50 applies to these unworked sheets in the designated thickness and area range.
Blown Patterned Glass Sheet 2.65mm Large Format
Large rectangular blown glass sheet with subtle patterns, 2.65mm thick over 0.58 m², for privacy partitions or shower screens. Under HTS 7004.90.25.50 as blown glass not otherwise worked; patterns from blowing process don't count as 'worked'.
Drawn Clear Glass Slab 3mm for Laboratory Tables
Clear drawn glass rectangular sheet, 3mm thick exceeding 0.58 m², used as protective tops for lab benches. Classifies in HTS 7004.90.25.50 for drawn sheets in specified dimensions, pre-annealing processes ignored per chapter notes.
Drawn Frosted Glass Sheet 3.4mm Large Privacy Panel
Frosted finish drawn glass rectangular sheet, 3.4mm thick over 0.58 m², for office privacy dividers. Falls under HTS 7004.90.25.50; frosting from drawing process before annealing not considered 'worked'.