Drawn Clear Glass Sheet for Display Cases
Clear drawn glass in rectangular sheets, 3 mm thick with 0.3 m² area, intended for museum display case fronts. Falls squarely under HTS 7004.90.25.20 for drawn sheets not otherwise worked in the defined size range. Provides high clarity without distortions from float processes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If multiple sheets bound as multiple-walled insulating unit
Assembled insulating glass units from sheets move to 7006 per heading provisions.
If float glass with wire embedding
Wired float sheets for safety differ from plain drawn under material/process headings.
If over 3.5 mm thickness
Thicker sheets in same area exceed this subheading's thickness limit.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Use non-returnable packaging to prevent damage claims shifting liability during import
• Declare as 'in sheets' explicitly; avoid end-use terms like 'display glass' to prevent 7006 probe
Related Products under HTS 7004.90.25.20
Drawn Soda-Lime Glass Sheet for Picture Frames
A rectangular drawn glass sheet measuring 3 mm thick and 0.4 m² in area, used primarily for picture frame glazing. It falls under HTS 7004.90.25.20 as drawn glass in sheets, not otherwise worked, with specified dimensions exceeding 0.26 but not over 0.58 m². The sheet has no absorbent, reflecting, or non-reflecting layers beyond basic annealing.
Rectangular Blown Glass Panel for Light Diffusers
Blown glass sheet in rectangular shape, 2.5 mm thick and 0.35 m² area, designed for diffusing light in fixtures. Classified under HTS 7004.90.25.20 for blown glass sheets not otherwise worked, fitting the size criteria over 0.26 m² but not exceeding 0.58 m². No additional layers or processing beyond blowing and annealing.
Drawn Glass Sheet for Model Aircraft Canopies
Precision drawn glass rectangle, 3.2 mm thick covering 0.5 m², used for transparent canopies in scale model aircraft. Meets HTS 7004.90.25.20 as unworked drawn glass in sheets within the specified thickness (over 2 not over 3.5 mm) and area range. Ideal for hobbyist applications without further processing.
Unworked Blown Glass for Greenhouse Panels
Blown glass sheets rectangular shaped, 2.8 mm thick and 0.45 m² area, supplied for small greenhouse glazing. HTS 7004.90.25.20 applies to these blown glass sheets not otherwise worked, precisely matching size and thickness parameters. Suitable for cutting and installation on-site.
Blown Glass Sheet for Art Easel Glazing
Hand-blown rectangular glass sheet, 2.65 mm thick and 0.55 m², for protecting artwork on easels. HTS 7004.90.25.20 covers this unworked blown glass fitting exact dimensional criteria without additional processing. Offers subtle imperfections characteristic of blown production.
Drawn Glass Pane Blank for Tabletop Inserts
Drawn soda glass rectangular blank, 3.4 mm thick spanning 0.42 m², for custom tabletop protective inserts. Precisely matches HTS 7004.90.25.20 as unworked sheet glass in specified dimensions. Bulk imported for fabricators to cut and edge domestically.