Blown Glass Sheet for Small Display Cases
Thin blown glass sheet, 2.5 mm thick and 0.20 m² area, ideal for fronts of miniature display cases. Classified in HTS 7004.90.25.10 for blown glass in rectangular sheets under 0.26 m², without additional working.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If actually float glass despite appearance
Most modern clear sheet glass is float-processed, moving to 7005; test via flatness/ribbon marks.
If for sheets with ground edges or drilled holes
Minimal working like edging classifies as 'otherwise worked' in 7007, not raw sheets.
If made of lead crystal glass
Glass with ≥24% lead monoxide content shifts to decorative glass articles in 7013.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Document production via blowing process with manufacturer affidavits to distinguish from float glass
• Measure area precisely (length x width ≤0.26 m²) to avoid reclassification to larger sheet subheadings
• Ensure no absorbent/reflecting layers unless declared, as those have separate provisions
Related Products under HTS 7004.90.25.10
Drawn Soda-Lime Glass Sheet for Picture Frames
A rectangular drawn glass sheet measuring 3mm thick and 0.25 m², used for glazing picture frames. It falls under HTS 7004.90.25.10 as drawn glass in sheets, not over 0.26 m² in area, with thickness over 2 but not over 3.5 mm, and not otherwise worked beyond possible annealing.
Drawn Glass Panel for Model Aircraft Canopies
Precision drawn glass sheet 3.2 mm thick, 0.24 m², used for transparent canopies in scale model aircraft. HTS 7004.90.25.10 applies to such small rectangular drawn glass sheets not otherwise worked.
Clear Blown Glass Sheet for Hobby Greenhouse Panels
Blown glass rectangle 2.8 mm thick covering 0.22 m², for DIY hobby greenhouse construction. Fits HTS 7004.90.25.10 as unworked blown glass sheets within size limits.
Drawn Glass for Small Tabletops
3 mm drawn glass sheet of 0.26 m² exactly, suitable for tiny café tabletops or side tables. HTS 7004.90.25.10 covers these small unworked rectangular sheets.
Blown Glass Observation Window Sheets
2.4 mm thick blown glass sheets at 0.18 m² for small observation windows in equipment housings. Meets criteria for HTS 7004.90.25.10 as unworked blown rectangular glass.
Drawn Frosted Glass Sheets for Privacy Partitions
Rolled drawn glass with acid-etched frosting, 3.5 mm thick, 0.25 m² for small bathroom partitions. Still HTS 7004.90.25.10 if frosting is pre-annealing surface treatment per chapter notes.