Body Tinted Green Drawn Glass Sheet 4mm Thick
This is a rectangular sheet of drawn glass colored green throughout its mass (body tinted), measuring 4mm in thickness, suitable for greenhouse glazing or decorative panels. It falls under HTS 7004.20.20.10 as drawn glass in sheets, body tinted, rectangular shape, less than 5mm thick, and not otherwise worked beyond any permitted layers. The uniform coloring through the mass distinguishes it from surface-colored glass.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If produced by float process instead of drawn
Float glass sheets, even body tinted and under 5mm, are classified in heading 7005 regardless of production method differences.
If edges are ground, beveled, or otherwise worked
Any mechanical working beyond permitted layers moves it from sheets (7004) to safety glazing or worked glass in 7007.
If cut to specific shapes for further fabrication rather than rectangular sheets
Glass cut to non-rectangular shapes or for specific uses loses 'sheet' status and enters heading 7006 for shaped articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify the glass is body tinted throughout the mass via lab testing, as surface coloring shifts classification to heading 7005
• Provide certificates confirming thickness under 5mm and drawn process to avoid reclassification as float glass in 7005
• Ensure documentation specifies rectangular shape and absence of other workings like edging to prevent duty adjustments
Related Products under HTS 7004.20.20.10
Opacified Frosted Drawn Glass Sheet 3.5mm Thick
A rectangular opacified (frosted) drawn glass sheet, 3.5mm thick, used for privacy partitions or shower screens. Classified under HTS 7004.20.20.10 for its opacification throughout, drawn production, rectangular form, and thickness under 5mm without other workings. Opacification makes it translucent rather than transparent.
Flashed Red Drawn Glass Sheet 2mm Thick
Rectangular drawn glass sheet with a thin red flashed layer on clear base, 2mm total thickness, ideal for stained glass effects in windows. HTS 7004.20.20.10 applies due to flashing (layered coloring), drawn sheet form, rectangular shape, and sub-5mm thickness. Flashing provides color without full body tinting.
IR-Reflecting Body Tinted Drawn Glass Sheet 4.2mm
Drawn glass sheet body tinted gray with an infrared-reflecting thin metal oxide layer, rectangular, 4.2mm thick for energy-efficient windows. Fits HTS 7004.20.20.10 as body tinted drawn sheet under 5mm with permitted reflecting layer per chapter notes. The layer enhances solar control without constituting 'other working'.
Opacified White Drawn Glass Sheet 1.5mm Thick
Thin rectangular opacified white drawn glass sheet, 1.5mm thick, for backlit displays or diffusers. Under HTS 7004.20.20.10 for opacification, drawn process, rectangular shape, and minimal thickness. Opacity achieved through mass composition.
Body Tinted Blue Flashed Drawn Glass 3mm Thick
Rectangular drawn glass sheet body tinted blue with additional clear flash layer, 3mm thick, for architectural vision panels. HTS 7004.20.20.10 covers the combined body tinting and flashing in thin rectangular drawn sheets. Dual coloring effects meet the subheading criteria.
Non-Reflecting Layer Gray Drawn Glass Sheet 4.8mm
Drawn rectangular glass sheet gray body tinted with non-reflecting chemical layer to reduce glare, 4.8mm thick for displays. Classifies in HTS 7004.20.20.10 per chapter note allowing such microscopically thin layers on body tinted drawn sheets under 5mm. Layer prevents surface reflections while maintaining translucency.