Glazed Ceramic Bathroom Wall Tile 6x6 inch
A square 6x6 inch (15x15 cm) glazed wall tile for bathroom applications, composed of fired clay-based ceramic with high water absorption over 10%. Classified under HTS 6907.23.90.11 due to its small size (≤30 cm square enclosure), glazing, and use as a hearth or wall finishing tile.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If porcelain or low absorption <0.5%
Porcelain/china tiles with low water absorption and translucency classify in 6907.22, not high absorption earthenware.
If used as sanitary fixture components
Tiles integral to sinks or baths may fall under Chapter 69 sanitary ware rather than wall tiles.
If for industrial furnace/roof applications
Chapter notes limit 6907 to non-refractory; high-temp kiln tiles go to 6901-6903 refractory goods.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include manufacturer specs confirming largest surface fits ≤30 cm square and water absorption test results
• Label shipments clearly as 'glazed wall tiles' to prevent confusion with paving flags in other subheadings
• Check for backing; if on mesh backing as mosaic, may require reclassification under principal heading
Related Products under HTS 6907.23.90.11
Glazed Earthenware Kitchen Backsplash Tile 4x4 inch
A 4x4 inch glazed ceramic tile designed for kitchen backsplashes, made from earthenware with a water absorption coefficient exceeding 10 percent by weight. It fits HTS 6907.23.90.11 as it is a glazed wall tile where the largest surface area is enclosed in a square less than 30 cm side, intended for finishing interior surfaces.
Hand-Painted Glazed Mosaic Wall Tile 2x2 inch
Small 2x2 inch hand-painted glazed ceramic tiles for decorative wall mosaics, fired earthenware body absorbing >10% water. Meets HTS 6907.23.90.11 as glazed tiles with surface area enclosed in <30 cm square, suitable for finishing ceramics in home decor.
Glazed Terracotta Floor Transition Tile 3x12 inch
A rectangular 3x12 inch (7.6x30 cm) glazed terracotta tile for floor transitions or wall bases, high absorption earthenware fired after shaping. Fits HTS 6907.23.90.11: glazed, >10% absorption, largest surface enclosable in 30 cm square for hearth/wall use.
Glazed Ceramic Shower Surround Tile 8x8 inch
8x8 inch (20x20 cm) glazed ceramic tiles for shower surrounds, earthenware with >10% water absorption, fired per Chapter 69 standards. HTS 6907.23.90.11 applies to these small glazed wall tiles used in wet-area finishing.
Decorative Glazed Wall Tile 5x10 inch Patterned
Patterned 5x10 inch glazed wall tile for accent features, high-porosity ceramic body (>10% absorption). Classified in HTS 6907.23.90.11 for glazed small-format wall finishing tiles meeting dimensional and absorption criteria.
Glazed High-Absorption Hearth Tile 4x8 inch
4x8 inch glazed ceramic hearth tile for fireplace surrounds, earthenware absorbing >10% water post-firing. HTS 6907.23.90.11 covers this small glazed tile for hearth/wall finishing applications.