Rectangular Glazed Stoneware Shower Tiles 2.5x6 Inch
These 2.5x6 inch rectangular glazed stoneware tiles for shower walls have straight-edged faces and controlled absorption of 0.5-10%. Density ≤3229/m² ensures classification fit, with largest area in <7cm square. Fired ceramic per Chapter 69, specifically HTS 6907.22.20.00 for glazed wall tiles.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If >3229 tiles per square meter
Higher density small tiles classify in adjacent 6907.22.40 for finer grids.
If not fired after shaping (heated <800°C)
Unfired panels or those cured below 800°C exclude from Chapter 69 to heading 6808.
If sold as set with porcelain lab ware
Tile-like components in lab porcelain sets classify under 6909 ornamental provisions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include lab reports for water absorption and confirm no cermet/metal content per exclusions
• Check tile count per m² in shipment samples to validate ≤3229 limit
• Label as wall tiles, not paving, to prevent shift to flags/paving subheadings
Related Products under HTS 6907.22.20.00
Glazed Porcelain Subway Wall Tiles 3x6 Inch
These rectangular 3x6 inch glazed porcelain tiles feature a classic subway design with straight-edged faces, ideal for kitchen backsplashes and bathroom walls. They have a water absorption between 0.5% and 10% and a surface area fitting within a 7cm square, with tile density not exceeding 3229 per square meter. Classified under HTS 6907.22.20.00 due to their fired ceramic composition, glazing, and specific size/density criteria.
Glazed Ceramic Kitchen Backsplash Tiles 4x4 Inch
Square 4x4 inch glazed ceramic tiles designed for kitchen backsplashes, with straight-line boundaries and a durable low-porosity body. Water absorption is 0.5-10%, and they meet the <7cm square enclosure with ≤3229 tiles/m² density. HTS 6907.22.20.00 applies as fired, glazed wall tiles of specified dimensions.
Glazed Ceramic Bathroom Floor Transition Tiles 3x3 Inch
3x3 inch square glazed ceramic tiles used for bathroom floor transitions, featuring straight boundaries and 0.5-10% absorption. They fit <7cm square and ≤3229/m², qualifying as wall/hearth tiles under HTS 6907.22.20.00 despite transitional use.
White Glazed Porcelain Metro Wall Tiles 75x150mm
75x150mm (approx 3x6 inch) white glazed porcelain metro-style tiles with straight edges for modern wall applications. Absorption 0.5-10%, density ≤3229/m², largest face <7cm square equivalent. HTS 6907.22.20.00 for these fired, glazed ceramic wall tiles.
Glossy Glazed Ceramic Penny Round Edge Tiles 4x4 Inch
4x4 inch glossy glazed ceramic tiles with straight-edged square faces (not rounds), for edging penny mosaics in walls. Meets 0.5-10% absorption, ≤3229/m², <7cm square. Classed in HTS 6907.22.20.00 as qualifying glazed wall tiles.
Glazed Wall Tile for Hearth Surround 2x8 Inch
2x8 inch glazed ceramic tiles for hearth surrounds, rectangular with straight lines, 0.5-10% absorption, ≤3229/m² density. Fits <7cm square on largest face, per HTS 6907.22.20.00 for hearth/wall applications.