Plastic Fireclay Refractory Brick
Fireclay brick produced via plastic forming method for complex shapes in boiler settings and ladle backup. Excellent workability and fired strength up to 1480°C. Clay-based refractory brick under 6902.90.10.10.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If siliceous earth composition
Distinction at heading level by raw material earth type, not forming method.
If containing >50% metallic iron
Steel-reinforced or iron-heavy refractories shift to Chapter 73.
If roof/floor tiles >3.2cm thick
US note defines tiles separately from bricks by thickness criterion.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Note manufacturing method (plastic vs. stiff mud) only if affecting properties; classification by composition
• Inspect for firing cracks pre-shipment; forming method can cause internal stresses
• Combine with mortar imports carefully; separate declarations prevent set classification
Related Products under HTS 6902.90.10.10
High-Alumina Fireclay Refractory Brick
A dense refractory brick made primarily from fireclay, fired at high temperatures to withstand extreme heat up to 1700°C. Used in furnace linings and kilns for its excellent thermal shock resistance and abrasion resistance. Classified under HTS 6902.90.10.10 as a clay-based refractory brick, distinct from siliceous or high-silica variants.
Standard Fireclay Refractory Brick
Standard-sized refractory brick composed of fireclay, designed for boiler and incinerator linings with service temperatures up to 1500°C. Offers good mechanical strength and chemical resistance to slags. Falls under HTS 6902.90.10.10 specifically for clay-composed refractory bricks other than siliceous types.
Shaped Fireclay Refractory Brick for Glass Furnaces
Custom-shaped fireclay bricks designed specifically for glass tank furnace crowns and walls, resisting molten glass corrosion at 1500°C+. Made from selected clay blends and high-fired. Classed under 6902.90.10.10 as clay refractory bricks.
Fireclay Checker Brick for Regenerators
Perforated fireclay bricks arranged in checkerwork patterns for heat recovery regenerators in glass and steelmaking furnaces. Optimized channels for gas flow at 1300-1400°C service. Specifically clay refractory bricks under HTS 6902.90.10.10.
Super-Duty Fireclay Refractory Brick
Premium super-duty fireclay brick with superior creep resistance for crown construction in reheating furnaces serving at 1500°C+. Low iron formulation enhances slag resistance. HTS 6902.90.10.10 clay brick classification.
Insulating Fireclay Refractory Brick
Lightweight insulating brick made from fireclay with high porosity for thermal insulation in high-temperature furnaces. Maintains structural integrity up to 1400°C while minimizing heat loss. HTS 6902.90.10.10 covers this clay-based refractory constructional good.