High-Alumina Refractory Firebrick
High-alumina refractory firebrick containing over 50% alumina (Al2O3), fired after shaping for high-temperature resistance. Used in furnaces and kilns for lining to withstand extreme heat without deforming. Classifies under 6902.20.10 as refractory bricks with predominant alumina content.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If containing >50% magnesia (MgO)
Magnesia-based refractory bricks shift to 6902.10 due to different primary oxide composition.
If made from siliceous fossil meals like kieselguhr
Excludes from 6902; chapter notes specify separate heading for siliceous earths.
If for non-refractory construction use
Loses refractory status if not designed for high-heat applications.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify chemical composition certificate showing >50% Al2O3 or SiO2 to confirm refractory classification
• Ensure bricks were fired after shaping at ≥800°C; provide firing process documentation
• Avoid misclassification as building bricks (6904); highlight high-temperature end-use
Related Products under HTS 6902.20.10
Silica-Alumina Refractory Brick
Refractory brick with >50% combined silica (SiO2) and alumina, engineered for blast furnace linings. Fired ceramic construction withstands thermal shock and corrosion from molten materials. Falls under 6902.20.10 for high-silica/alumina refractory bricks.
70% Alumina Kiln Brick
Kiln brick composed of 70% alumina for pottery and glass kilns, providing superior refractoriness. Shaped and fired to maintain structural integrity at 1700°C+. HTS 6902.20.10 applies to alumina-dominant refractory bricks.
Blast Furnace Alumina Brick
Heavy-duty alumina brick (>50% Al2O3) for blast furnace hot blast stove checker chambers. Refractory properties resist slag erosion and high thermal loads. Classified in 6902.20.10 as high-alumina refractory brick.
Insulating Alumina Refractory Brick
Lightweight insulating brick with >50% alumina and porous structure for furnace backup insulation. Fired ceramic retains low thermal conductivity at high temps. 6902.20.10 for high-alumina refractory bricks.
Chrome-Alumina Refractory Brick
Direct-bonded chrome-alumina brick (>50% Al2O3 with chromic oxide) for glass furnace regenerator checkers. Exceptional corrosion resistance to glass melts. Classifies 6902.20.10 despite chrome, as alumina primary.
Steel Ladle Alumina Brick
High-purity alumina brick (>60% Al2O3) for steel ladle impact pads and purge plugs. Fired to resist molten steel and slag penetration. 6902.20.10 for steelmaking refractory bricks.