Synthetic Resin Bonded Aluminum Oxide Grinding Wheel
A 6-inch diameter grinding wheel made from agglomerated aluminum oxide abrasives bonded with synthetic resins, designed for metalworking grinders. It falls under HTS 6804.22.10.00 because it is an agglomerated abrasive product bonded with synthetic resins, without frameworks, used for grinding and sharpening. Commonly used in workshops for sharpening tools and smoothing metal surfaces.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If bonded with natural resins or clays
Agglomerated abrasives bonded with natural materials like clay fall under the earlier subheading for different binders.
If mounted on a framework or handle
Tools with attached frameworks for grinding or polishing are classified as complete tools in Chapter 82, not bare abrasives.
If made of natural stone without agglomeration
Pure natural stone grindstones without synthetic binders are covered under the natural stone subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify the abrasive is agglomerated and bonded solely with synthetic resins; natural stone binders disqualify from this subheading
• Include mill test reports certifying composition to avoid reclassification during customs inspection
Related Products under HTS 6804.22.10.00
Bakelite Bonded CBN Grinding Wheel
High-performance wheel with cubic boron nitride (CBN) agglomerates in bakelite (synthetic phenolic resin) bond for superabrasive grinding of hardened steels. Under HTS 6804.22.10.00 for synthetic resin bonded agglomerated artificial abrasives. Essential for automotive crankshaft grinding.
Resinoid Zirconia Alumina Disc
Heavy-duty 7-inch resinoid disc blending zirconia alumina abrasives for aggressive grinding on stainless steel. HTS 6804.22.10.00 due to synthetic resin bond on agglomerated particles. Favored by fabricators for heat-resistant performance.
Synthetic Resin Mounted Point Set
Small shaped mounted points with synthetic resin bond for die grinders, used in toolroom finishing. Though 'mounted,' small shanks here classify as abrasives under HTS 6804.22.10.00 if primarily abrasive. For precision deburring.
Resin Bonded Non-Woven Surface Conditioning Disc
Non-woven nylon web impregnated with aluminum oxide and resin bonded for cleaning and blending surfaces. HTS 6804.22.10.00 as agglomerated abrasive with synthetic resin binder. Used on turbines and molds.
Phenolic Resin Bonded Pencil Grinding Point
Narrow pencil-shaped points with phenolic resin bond for intricate die work. Under HTS 6804.22.10.00 for small agglomerated abrasive forms. Jewelry and moldmaking applications.
Synthetic Resin Bonded Cup Grinding Wheel
4-inch cup wheel for concrete and stone grinding, resin bonded silicon carbide. HTS 6804.22.10.00 for masonry applications.