PVC-Lined Cotton Textile Hose
This is a flexible hose made from woven cotton textile fabric lined with PVC for water resistance, used in gardening and irrigation. It falls under HTS 5909.00.20.00 as textile hosepiping with a plastic lining, where the textile structure provides the primary form and flexibility. The visible PVC lining enhances durability without embedding the fabric entirely.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 3.3% | +35.0% | 38.3% |
| 🇲🇽Mexico | 3.3% | +10.0% | 13.3% |
| 🇨🇦Canada | 3.3% | +10.0% | 13.3% |
| 🇩🇪Germany | 3.3% | +10.0% | 13.3% |
| 🇯🇵Japan | 3.3% | +10.0% | 13.3% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If rubber is the predominant material and textile is merely reinforcing
Rubber tubing with minor textile reinforcement shifts to Chapter 40 as it loses the essential textile character.
If plastic forms the primary structure with textile as secondary
Predominantly plastic hoses are classified under Chapter 39, per 5903 exclusion notes for embedded or fully coated fabrics.
If for bulk rolls of rubberized yarn strips formed into tubing
Tubing from impregnated yarn or strip (not woven fabric) falls under heading 5604, as noted in 5903/5906 definitions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify the textile fabric is the essential character with visible lining; provide lab tests if coating weight exceeds 50% to avoid reclassification
• Include detailed invoices specifying textile composition, lining material, and end-use to prevent misclassification as plastic hose (Chapter 39)
• Ensure marking complies with FTC fiber content rules for textile portions and check for REACH compliance if importing from EU sources
Related Products under HTS 5909.00.20.00
Rubberized Nylon Garden Hose
A nylon textile braided hose coated with rubber for pressure resistance, commonly used for garden watering. Classified under HTS 5909.00.20.00 as textile hosepiping with rubber accessories, where the woven nylon provides structural integrity and the rubber enhances sealing. The coating is visible but does not exceed textile weight dominance.
Polyester Fire Hose with Plastic Lining
High-pressure fire-fighting hose constructed from polyester textile jacket with internal plastic liner for waterproofing. It qualifies for HTS 5909.00.20.00 as similar textile tubing with plastic accessories, essential character from the textile weave supporting high PSI ratings. The liner is visible and bonded but not embedding the fabric.
Braided Polypropylene Discharge Hose
Textile tubing made from braided polypropylene yarn with embedded plastic liner for sump pump discharge. Under HTS 5909.00.20.00 as other textile hosepiping with plastic accessories, the braid forms the flexible tube shape essential for conveying liquids. Lining prevents permeation while remaining visible.
Armored Textile Suction Hose
Nylon textile hose with embedded steel wire helix armor and rubber lining for vacuum applications in agriculture. Classified HTS 5909.00.20.00 for textile hosepiping with metal accessories, where textile body provides collapse resistance. Armor prevents kinking while visible through semi-transparent sections.
Chemical Transfer Textile Hose
Polyester textile reinforced hose with PTFE liner for corrosive chemical handling in industry. HTS 5909.00.20.00 covers this as textile tubing with plastic lining/accessories, textile braid essential for pressure containment. Liner bonds chemically but visible in cross-section.
Air Compressor Textile Hose
Rubber-coated polyester textile hose for pneumatic tools, with brass fittings as accessories. Falls under HTS 5909.00.20.00 as other textile hosepiping, textile providing flexibility and burst strength. Coating weight compliant with visible textile structure.