PVC Coated Polyester Banner Fabric

A durable polyester base fabric coated with PVC exceeding 60% by weight, certified under note 9 to section XI for high-plastic content tarpaulins and banners. The visible plastic coating meets 5903 requirements as it can be bent around a 7mm cylinder without fracturing. Ideal for outdoor advertising and signage.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+35.0%35%
🇲🇽MexicoFree+10.0%10%
🇨🇦CanadaFree+10.0%10%
🇩🇪GermanyFree+10.0%10%
🇯🇵JapanFree+10.0%10%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

5903.90.10.00Higher: 37.7% vs 35%

If under 60% plastics by weight

Lower plastic content shifts to general man-made fiber category in same heading.

3921.90.11.00Higher: 39.2% vs 35%

If textile merely reinforces plastic sheet

Per 5903 note (a)(5), reinforcing fabrics in cellular plastics go to chapter 39.

5407.61Lower: 24.9% vs 35%

If uncoated woven polyester fabric

Without visible plastic coating, classifies as plain man-made woven fabric in chapter 54.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

• Verify plastic weight exceeds 60% via lab testing; retain certificates for CBP review

• Ensure coating is visible to naked eye and flexible per 5903 note (a)(1)

• Avoid misclassification as chapter 39 if fully embedded or rigid

Related Products under HTS 5903.90.15.00