Polyurethane Coated Nylon Ripstop Fabric

This lightweight nylon ripstop fabric is coated with polyurethane on one side to provide water resistance while maintaining breathability, visible to the naked eye. It falls under HTS 5903.20.30.90 as a textile fabric (from chapter 54) impregnated or coated with polyurethane plastic, not excluded by chapter notes such as invisible coating or full embedding. Commonly used in outdoor gear like tents and backpacks.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China2.7%+35.0%37.7%
🇲🇽Mexico2.7%+10.0%12.7%
🇨🇦Canada2.7%+10.0%12.7%
🇩🇪Germany2.7%+10.0%12.7%
🇯🇵Japan2.7%+10.0%12.7%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

5407.20.00.00Lower: 35% vs 37.7%

If the polyurethane coating is invisible to the naked eye

Uncoated or imperceptible coatings remain classified under woven man-made fiber fabrics of chapter 54, per 5903 exclusions.

3921.13Lower: 14.2% vs 37.7%

If fabric is fully embedded or coated on both sides with rigid plastic

Products where textile is completely obscured or rigid (cannot bend around 7mm cylinder) fall under chapter 39 plastics.

5906.99.10.00Same rate: 37.7%

If coated with rubber instead of polyurethane

Rubberized textile fabrics transfer to heading 5906, regardless of visibility if meeting weight criteria.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Verify the polyurethane coating is visible to the naked eye and document weight per m² to distinguish from uncoated fabrics in chapters 54-55

Provide lab tests confirming polyurethane composition and textile base to avoid reclassification to chapter 39 plastics

Label fiber content accurately, as blends over certain plastic thresholds may shift to heading 5903 exclusions

Related Products under HTS 5903.20.30.90

PU Laminated Polyester Taffeta Fabric

Polyester taffeta fabric laminated with a thin polyurethane film for waterproofing, bonded via heat or adhesive, visible in cross-section. Classified in 5903.20.30.90 for polyurethane-laminated textile fabrics from chapter 54, excluding cases like full plastic embedding. Ideal for rainwear linings and lightweight tents.

Polyurethane Coated Cotton Canvas

Heavyweight cotton canvas impregnated with polyurethane for water repellency, coating visible without magnification. Fits HTS 5903.20.30.90 as cotton textile fabric (chapter 52-55) coated with polyurethane, not excluded for invisibility or rigidity. Used in tarpaulins and upholstery.

PU Coated Tricot Knit Fabric

Synthetic tricot knit fabric coated with polyurethane for stretchy waterproofing, coating layer visible. Under 5903.20.30.90 for knitted textiles (headings 6002-6006) treated with PU, meeting visibility and flexibility notes. Common in sportswear and medical gowns.

Polyurethane Laminated Ripstop Nylon

Ripstop nylon sheets laminated with PU film for enhanced durability and waterproofing, layers bonded and visible in cross-section. HTS 5903.20.30.90 applies to such polyurethane-laminated man-made fiber fabrics, flexible and textile-dominant. Used in paragliders and kites.

PU Impregnated Polyester Oxford Fabric

Polyester oxford weave impregnated throughout with polyurethane for oil and water resistance, surface treatment visible. Classed in 5903.20.30.90 for PU-impregnated textile fabrics, compliant with chapter definitions excluding invisible treatments. For tablecloths and bags.

Waterproof PU Coated Taslan Fabric

Taslan textured polyester fabric coated with polyurethane for weatherproofing, coating clearly visible. HTS 5903.20.30.90 for such PU-coated synthetics, flexible and not fully plastic-covered. Popular in jackets and awnings.