Nylon Filament Needle-Punched Nonwoven 220 gsm
Heavy needle-punched nonwoven from nylon filaments, at 220 g/m², used for automotive insulation and protective barriers. It matches HTS 5603.94.90.70 as other filament nonwovens over 150 g/m², with minimal impregnation. The process bonds filaments without full embedding.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If qualifying as felt via needleloom process
Chapter note defines needleloom felt as within 5602, separate from nonwovens in 5603.
If laminated with rubber where textile is <=50% or embedded
Exclusions for felt/nonwovens embedded in or low-textile rubber go to Chapter 40.
If woven from filaments rather than nonwoven
Woven fabrics of filaments classify in Chapter 54, not nonwovens of Chapter 56.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit fiber content analysis proving filament (not multifilament yarn) construction for accurate HTS
• Declare any plastic content <50% textile to avoid Chapter 39 shift; get pre-shipment lab verification
Related Products under HTS 5603.94.90.70
Polypropylene Filament Spunbond Nonwoven Fabric 200 gsm
This heavy-duty nonwoven fabric, made from continuous polypropylene filaments and weighing over 200 g/m², is used for industrial packaging and protective covers. It falls under HTS 5603.94.90.70 as a nonwoven of filaments, exceeding 150 g/m², neither specifically for apparel nor medical use. The filament structure and weight distinguish it from lighter nonwovens.
Polyester Continuous Filament Nonwoven Geotextile 180 gsm
A robust nonwoven geotextile produced from polyester continuous filaments, weighing 180 g/m², designed for soil stabilization in civil engineering. Classified under HTS 5603.94.90.70 for filament-based nonwovens over 150 g/m², not coated beyond basic bonding. Its heavy weight suits heavy-duty applications like erosion control.
PP Filament Meltblown-Nonwoven Composite 160 gsm
A composite nonwoven of polypropylene filaments with meltblown layer, totaling 160 g/m², for heavy-duty filtration. Falls under HTS 5603.94.90.70 as filament nonwoven >150 g/m², whether laminated. Bonding uses minimal plastics, visible only microscopically.
Polyolefin Filament Nonwoven Roofing Underlayment 250 gsm
Extra-heavy polyolefin filament nonwoven at 250 g/m² for roofing underlayment, providing vapor barrier. Classified in HTS 5603.94.90.70 for other filament nonwovens over 150 g/m², lightly coated. Weight and filament base keep it in Chapter 56.
Bicomponent Filament SMS Nonwoven 210 gsm
SMS (spunbond-meltblown-spunbond) nonwoven from bicomponent filaments, 210 g/m², for protective barriers. Under HTS 5603.94.90.70 as other filament nonwovens >150 g/m². Multi-layer filament construction with integral bonding.
PA6 Filament Nonwoven Battery Separator 170 gsm
Nylon 6 (PA6) filament nonwoven, 170 g/m², for lithium battery separators requiring high strength. HTS 5603.94.90.70 for filament nonwovens over 150 g/m², minimally coated. Precision calendered for technical performance.