Interlining Nonwoven Fusible 75 g/m²
Fusible nonwoven interlining from polyester at 75 g/m² with powder adhesive for garment collars and cuffs. HTS 5603.93.00.90 as other nonwovens in weight range; adhesive dot pattern not considered full impregnation per chapter note 5604 visibility rule adapted. Textile primary.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If rubber-coated for rubberized textile
Rubber coated fabrics go to Chapter 59.
If impregnation/coating visible to naked eye
Chapter note excludes invisible coatings from 5604 but visible ones classify there.
If for imitation leather interlining
PU-coated interlinings treated as coated textiles in 59.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Adhesive must not be visible/cohesive primary; test peel strength to prove fabric classification
• Comply with FTAL fiber content for apparel components
• Avoid pre-cut shapes; import as roll goods for 5603
Related Products under HTS 5603.93.00.90
Polypropylene Spunbond Nonwoven Fabric 100 g/m²
This spunbond nonwoven fabric made from polypropylene weighs 100 g/m² and is used for disposable medical gowns and protective covers. It falls under HTS 5603.93.00.90 as a nonwoven textile material weighing more than 70 g/m² but not more than 150 g/m², without plastic or rubber impregnation visible to the naked eye. The material's structure relies on mechanical bonding rather than weaving or knitting.
SMS Nonwoven Fabric 120 g/m² for Surgical Drapes
SMS (spunbond-meltblown-spunbond) nonwoven fabric at 120 g/m² provides bacterial barrier properties for surgical drapes and gowns. Classified in HTS 5603.93.00.90 due to its nonwoven construction and weight between 70-150 g/m², with bonding not relying on plastics as the primary substance. It meets chapter definitions for nonwovens enhanced by mechanical or thermal processes.
Needlepunch Polyester Nonwoven 90 g/m² for Automotive Insulation
Needlepunch nonwoven from polyester fibers, weighing 90 g/m², used for car door panels and trunk liners. It qualifies under HTS 5603.93.00.90 as a nonwoven fabric in the specified weight range, with cohesion from needleloom felting process as per chapter notes. No plastics impregnation affects its textile classification.
Cellulose Nonwoven Wipe Sheet 110 g/m²
Nonwoven sheets from wood pulp cellulose weighing 110 g/m², designed for industrial cleaning wipes. HTS 5603.93.00.90 applies as 'other' nonwovens in the 70-150 g/m² range, encompassing man-made or natural fiber nonwovens without disqualifying coatings. Cohesion enhanced by airlaying or similar processes.
Bicomponent Fiber Nonwoven 130 g/m² for Filtration
Thermal-bonded bicomponent fiber nonwoven at 130 g/m² for air and liquid filtration media. Falls under HTS 5603.93.00.90 as other nonwovens 70-150 g/m², where fibers are synthetic with core-sheath structure for bonding without external plastics. Complies with chapter notes excluding only fully embedded materials.
PE-Laminated Freezer Paper Nonwoven Base 80 g/m²
Nonwoven fabric base at 80 g/m² lightly laminated with thin PE film for freezer paper used in meat wrapping. HTS 5603.93.00.90 covers it as the nonwoven layer dominates, with lamination not fully coating or embedding per chapter notes allowing inclusion in 5603. Primarily textile by weight and visibility.