Spunlace Nonwoven Wipes Substrate

Hydroentangled spunlace nonwoven viscose fabric weighing 15 g/m² for wet wipes and cosmetic pads. Falls under HTS 5603.91.00.90 as other lightweight nonwovens not coated or laminated. Provides absorbency without chemical binders.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+35.0%35%
🇲🇽MexicoFree+10.0%10%
🇨🇦CanadaFree+10.0%10%
🇩🇪GermanyFree+10.0%10%
🇯🇵JapanFree+10.0%10%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

5603.93.00Same rate: 35%

If weighing 100 g/m² or more

Heavier nonwovens have separate weight-based subheadings.

6307.10Lower: 15.3% vs 35%

If cut to size and hemmed as finished wipes

Made-up floorcloths and dishcloths are Chapter 63 textiles.

4703.21.00Lower: 25% vs 35%

If primarily regenerated cellulose pulp sheet

Cellulose wadding sheets classified under Chapter 47 paper materials.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Submit fiber content analysis (viscose vs synthetic ratio)

Ensure declaration matches EXW weight specifications

Beware of reclassification if pre-impregnated with solutions

Related Products under HTS 5603.91.00.90

Spunbond Polypropylene Facial Mask Fabric

Lightweight spunbond nonwoven polypropylene fabric weighing 20 g/m², used as the outer layer in disposable surgical face masks. It falls under HTS 5603.91.00.90 as a nonwoven textile material under 25 g/m², not impregnated or laminated with plastics visible to the naked eye. This classification applies to uncoated nonwovens primarily for protective apparel.

SMS Nonwoven Coverstock for Diapers

SMS (spunmelt spunbond) nonwoven fabric at 18 g/m² serving as soft topsheet for baby diapers and adult incontinence products. Classified under HTS 5603.91.00.90 for lightweight nonwovens not over 25 g/m² without rubber or plastic bonding visible externally. Essential for hygiene product manufacturing.

Meltblown Filter Media Nonwoven

Ultra-fine meltblown nonwoven polypropylene at 22 g/m² used as filter layer in N95 respirators and air filters. HTS 5603.91.00.90 covers this lightweight nonwoven without plastic lamination visible to the eye. Critical for filtration efficiency in PPE.

Airlaid Nonwoven Pulp Core Material

Airlaid nonwoven fluff pulp composite at 24 g/m² for absorbent cores in feminine hygiene pads. HTS 5603.91.00.90 for lightweight nonwovens under 25 g/m² without rubber bonding. Enables superabsorbent polymer integration.

Flashspun Nonwoven Tyvek-like Sheet

Flashspun high-density polyethylene nonwoven sheeting at 16 g/m² similar to Tyvek for protective packaging and housewrap. Under HTS 5603.91.00.90 as lightweight nonwoven where plastic forms bonding but not visible coating. Offers breathable barrier properties.

Carded Nonwoven Interfacing Fabric

Lightly bonded carded nonwoven polyester at 12 g/m² for garment fusible interfacing. HTS 5603.91.00.90 classification for sub-25 g/m² nonwovens without visible plastic dots. Used in apparel manufacturing for structure.