Polypropylene Spunbond Nonwoven Fabric 200 g/m²
A heavy-duty spunbond nonwoven fabric made from polypropylene man-made filaments, weighing 200 g/m², used for industrial packaging and protective covers. It falls under HTS 5603.14.90 as a nonwoven of man-made filaments exceeding 150 g/m², not otherwise specified. This classification applies to uncoated or simply laminated versions without full embedding in plastics.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If weighing 150 g/m² or less
Lighter nonwovens of man-made filaments fall under the subheading for weights up to 150 g/m².
If completely embedded or fully coated on both sides with plastics, visible to naked eye
Chapter note excludes such heavily coated nonwovens, classifying them as plastic sheets in Chapter 39.
If made of man-made fibers but sold as narrow woven fabric alternative
If processed into narrow widths (<30 cm) and resembling woven, it may classify under plaiting materials.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify exact weight per m² with lab testing to confirm >150 g/m² classification and avoid reclassification to lighter subheadings
• Provide mill certificates showing man-made filament composition (e.g
• polypropylene) to prevent disputes over fiber content
• Ensure no visible full-side coating with plastics; if present and naked-eye visible, it may shift to Chapter 39
Related Products under HTS 5603.14.90
Automotive Headliner Nonwoven Substrate 180 g/m²
Nonwoven substrate from polyester filaments weighing 180 g/m², used as backing for car interior headliners. Classified in HTS 5603.14.90 for heavy man-made filament nonwovens not specifically enumerated. It qualifies as it's over 150 g/m² and primarily textile-based without disqualifying plastic lamination.
Geotextile Nonwoven Fabric 250 g/m² Polyester
Heavy polyester filament nonwoven geotextile weighing 250 g/m² for soil stabilization and drainage in civil engineering. HTS 5603.14.90 covers this as 'other' nonwovens of man-made filaments over 150 g/m². It's not excluded as it lacks full plastic embedding or visible bilateral coating.
Industrial Filter Nonwoven Media 220 g/m²
Polypropylene filament nonwoven media at 220 g/m² for heavy-duty air and liquid filtration in manufacturing. Falls under HTS 5603.14.90 as other heavy nonwovens of man-made filaments. Classification holds if no disqualifying plastic coating per chapter notes.
Medical Drape Nonwoven Fabric 160 g/m²
Sterilization-resistant nonwoven from polypropylene filaments, 160 g/m², for surgical drapes and gowns. HTS 5603.14.90 applies to this heavy 'other' man-made filament nonwoven. It remains in Chapter 56 as textile material exceeds 50% without full embedding.
Heavy Crop Cover Nonwoven 190 g/m²
Polyester filament nonwoven agricultural fleece weighing 190 g/m² for frost protection and weed suppression. Classified under HTS 5603.14.90 as other nonwovens >150 g/m² of man-made filaments. Not excluded as cohesion is fiber-based, not primarily plastic-bonded.
Insulation Nonwoven Backing 210 g/m²
Thermal insulation nonwoven from bicomponent filaments at 210 g/m² for appliance and building use. HTS 5603.14.90 for heavy man-made filament nonwovens, other. Stays here if not merely reinforcing cellular plastics.