Abstract Printed Modal-Lambswool Coating Fabric
Heavyweight 250 gsm woven coating fabric blending 72% modal staple fibers with 28% lambswool, abstract printed design for outerwear. Under HTS 5516.34.10.00 for printed other woven artificial staple <85% with fine hair. Exceeds sheeting weights per note (b).
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If >=85% wool or fine hair
High wool content qualifies for pure wool woven fabrics in Chapter 51.
If made from filament yarns not staple
Staple vs filament distinction separates Chapter 55 from 54 man-made filaments.
If rubberized or impregnated
Impregnated fabrics for technical use shift to Chapter 59 coated textiles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify non-shrinking treatment for wool content to comply with FTC labeling rules
• Provide width measurements (<168 cm may trigger printcloth scrutiny if applicable)
• Avoid pitting against 55.13 by confirming wool, not cotton, as main mix
Related Products under HTS 5516.34.10.00
Printed Polyester-Wool Blend Suiting Fabric
This woven fabric is a blend of 70% polyester staple fibers and 30% wool, printed with a subtle herringbone pattern, weighing approximately 220 gsm. It falls under HTS 5516.34.10.00 as it contains less than 85% artificial staple fibers mixed mainly with wool and is printed. Used primarily for tailoring men's suits and trousers.
Floral Printed Acrylic-Wool Dress Fabric
A lightweight printed woven fabric blending 75% acrylic staple fibers with 25% fine merino wool, featuring vibrant floral motifs, suitable for women's dresses. Classified under HTS 5516.34.10.00 due to <85% artificial fibers mixed solely with wool and printed finish. Meets Chapter 55 notes for mixed woven fabrics.
Damask Printed Polyester-Cashmere Blend
Luxury damask-printed woven fabric of 82% polyester staple and 18% cashmere, for high-end upholstery or evening wear. HTS 5516.34.10.00 covers this printed 'other' category with <85% artificial mixed solely with fine animal hair. Not square construction per notes.
Tartan Printed Acrylic-Alpaca Fabric
Woven tartan-printed fabric blending 76% acrylic staple with 24% alpaca hair, 180 gsm, for Scottish-inspired vests. Fits HTS 5516.34.10.00 as printed other woven <85% artificial with fine animal hair. Outside cheesecloth parameters.
Jacquard-Like Printed Polyester-Wool Drapery
Printed drapery fabric simulating jacquard with 70% polyester staple and 30% wool, bold patterns, 300 gsm. Under HTS 5516.34.10.00 as heavy printed other woven <85% artificial-wool mix. Excludes multiple yarn sheeting.
Oriental Printed Modal-Camel Hair Blend
Exotic oriental print on woven 77% modal staple and 23% camel hair fabric, for kimono-style robes. HTS 5516.34.10.00 applies to this printed other category <85% artificial with fine hair. Lightweight, not broadcloth.