Modal-Cotton Printed Bedding Printcloth
160 gsm printed printcloth with pastel patterns for bedding, 70% cotton-30% modal staple mixed solely with polyester filaments, square construction >33 picks/cm, avg yarn 55.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made up into bed sheets
Finished bed coverings shift to Chapter 63 made-up textile articles.
If 85%+ artificial staple fibers
Higher staple content uses 5512 for predominantly artificial staple wovens.
If of cotton, printed, but >170 gsm
Heavier weight cotton printcloths fall under Chapter 52 heavier fabric headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Ensure width <168 cm if combed, per note (c)(ii); declare accurately
• Avoid classifying as sheeting—printcloth excludes printcloth from sheeting note
• Batch test for colorfastness; customs may check printing durability
Related Products under HTS 5516.24.00.30
Polyester-Cotton Printed Printcloth Fabric
This plain weave printcloth fabric weighs 150 gsm, contains 40 singles yarns per square cm, and is printed with floral patterns. It is mixed mainly with cotton (70%) and less than 85% artificial staple fibers, with man-made filament yarns, fitting the printcloth definition in HTS 5516.24.0030 due to its square construction and specific yarn count.
Rayon Blend Printed Printcloth Sheeting
Printed printcloth certified at 145 gsm with 45 warp/filling picks per cm, blended 60% cotton and 40% rayon staple with polyester filaments. Meets HTS 5516.24.0030 printcloth criteria: plain weave, square construction, average yarn numbers 43-68, no cabled yarns.
Viscose Filament Mixed Printed Printcloth
Printed floral printcloth at 155 gsm, 65% viscose staple <85%, mixed with cotton and viscose filaments, plain weave with 42 singles yarns/cm, napped finish allowed under note (c).
Bamboo Viscose Printed Shirting Printcloth
152 gsm printed printcloth for shirting with stripe patterns, 68% cotton-32% bamboo viscose staple with filament mix, exactly 44 yarn/cm, <170 gsm printcloth spec.
Tencel-Cotton Printed Lining Printcloth
Printed 158 gsm printcloth for garment linings, mixed 72% cotton-Tencel staple <85% artificial with poly filaments, square plain weave 46 singles/cm compliant.
Soybean Fiber Mixed Printed Printcloth
149 gsm printed abstract printcloth, 75% cotton-soybean staple (<85% artificial) mixed with acrylic filaments, 41 yarn/cm square, napped printcloth type.