Unbleached Acrylic-Cotton Blend Printcloth
Unbleached plain weave printcloth featuring acrylic staple fibers (<85%) blended mainly with cotton filaments, under 170 g/m², square construction with precise 50-60 yarn numbers and >33 picks per cm². Fits HTS 5516.21.00.30 as unbleached printcloth per statistical notes excluding cabled yarns. Ideal for pre-printing in upholstery and crafts.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If 85%+ artificial staple fibers with cotton
Higher staple fiber content classifies under 5514 for cotton-mixed artificial staple fabrics.
If staple fibers are cotton dominant (>85%)
Shifts to Chapter 52 if cotton staple exceeds threshold, treated as cotton fabric.
If sheeting instead of printcloth specs
Lower yarn density or different construction meets sheeting definition in statistical note (b).
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document filament vs staple fiber ratio with supplier certificates to meet 'mixed mainly with man-made filaments' rule
• Declare as unbleached; any bleaching pushes it to the bleached subheading
Related Products under HTS 5516.21.00.30
Bleached Polyester-Viscose Printcloth Fabric
This plain weave fabric is made from less than 85% viscose staple fibers mixed with polyester filaments, weighing under 170 g/m² with 43-68 yarn numbers and over 33 singles yarns per cm² in square construction. It qualifies as printcloth under HTS 5516.21.00.30 due to its specific weave density and composition for printing applications. Commonly used for lightweight apparel linings and decorative prints.
Lyocell Blend Filament Printcloth
Bleached lyocell staple fiber fabric (<80%) mixed with nylon filaments, printcloth specs: <170 g/m², 45-65 yarn nums, >33 singles/cm² square plain weave. HTS 5516.21.00.30 applies to this unbleached/bleached mixed type per chapter notes. Popular for eco-friendly printed labels and packaging.
Viscose Printcloth with Spandex Filaments
Unbleached printcloth of viscose staple (75%) and spandex man-made filaments, plain weave 160 g/m², average yarn 50, square >34/cm² singles. Precisely matches HTS 5516.21.00.30 printcloth definition excluding multiples. Used in stretchy printed sportswear linings.
Acetate Staple-Silk Filament Printcloth
Bleached acetate artificial staple (<85%) with silk man-made filaments printcloth, <170 g/m², 62 yarn num, square plain >33 singles/cm². HTS 5516.21.00.30 for this luxury mixed weave per notes. For high-end fashion print bases.
Viscose-Rayon Filament Printcloth for Apparel
Bleached printcloth of 70% viscose staple and 30% rayon man-made filaments, plain weave under 170 g/m² with 55 average yarn number, >33 singles per cm², square build. Classified in HTS 5516.21.00.30 for unbleached/bleached printcloth mixed <85% staple. Used in blouses and scarves for high-quality print reception.
Modal Staple-Polyester Printcloth Sheeting
Unbleached printcloth blending modal artificial staple fibers (<85%) with polyester filaments, plain weave 150 g/m², 60 yarn number, square with >35 ends/picks per cm², no cabled yarns. Meets HTS 5516.21.00.30 printcloth criteria per note (c). Suited for bedding prints and lightweight curtains.