ES Sheath-Core Bico Polyester Fiber 2D 32mm
Extensible sheath (ES) bi-component polyester staple fibers, 2 denier ultrafine, 32mm length, with copolyester sheath melting lower than PET core for superior bonding. Common in flushable wipes, medical nonwovens, and high-loft battings via calendering or air-through bonding. HTS 5503.20.0015 covers these precise thermal bonding fiber specifications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If polypropylene-based bi-component
Olefin polymer bi-components use separate statistical breakouts from polyester chemistry.
If blended and woven into fabric during import
Any fabric construction, even from bi-component fibers, shifts to Chapter 51 wool blends or Chapter 55 wovens.
If manufactured as textured filament yarn
Texturing process converts staple precursors to continuous yarn under Chapter 54 synthetics.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Supplier certification of 'no crimp' or 'crimped' status irrelevant for 5503.20.0015 but document for downstream processing
• Prevent bulk packaging confusion with filament by including staple length distribution specs (CV% <20%)
• EU REACH compliance often required; align with US TSCA declarations for polyester copolymer content
Related Products under HTS 5503.20.00.15
Bico Polyester Thermal Bonding Staple Fiber 4D 6mm
Bi-component polyester staple fibers with a low-melt copolymer sheath surrounding a high-melt core, cut to 6mm length at 4 denier. Designed specifically for thermal bonding applications where the sheath melts at lower temperatures to fuse fibers without adhesives. Classified under HTS 5503.20.0015 due to their bi-component structure optimized for nonwoven bonding processes.
Thermal Bondable Polyester Bico Staple Fiber 15D 38mm
Co-PET/PET bi-component staple fibers with 15 denier thickness and 38mm length, featuring outer sheath that melts at ~120°C for fiber-to-fiber fusion. Used in automotive insulation felts, filtration media, and durable nonwovens requiring point bonding strength. Fits HTS 5503.20.0015 as unprocessed synthetic staple explicitly for thermal bonding applications.
Concentric Bico Thermal Fusion Polyester Staple 6D 65mm
Concentric sheath-core bi-component polyester fibers, 6 denier, 65mm staple length, engineered for uniform thermal fusion in needlepunched geotextiles and carpet underlays. The outer copolymer melts selectively to create strong interfiber bonds during hot air or calender bonding. Precisely matches HTS 5503.20.0015 definition for bonding-purpose bi-component synthetics.
Side-by-Side Bico Polyester Bonding Fiber 4.5D 40mm
Side-by-side (SxS) bi-component polyester staple fibers with 4.5 denier and 40mm cut length, providing latent crimp activation plus thermal bonding capability via differential melting sheath. Used in stretch nonwovens for apparel interlinings and compressible battings. HTS 5503.20.0015 encompasses all low-melt sheath configurations for fiber bonding.
Eccentric Sheath-Core Bico Fiber 1.5D 25mm
Eccentric sheath-core bi-component polyester microfibers at 1.5 denier fineness, 25mm staple length for ultra-fine thermal bonded nonwovens in beauty masks and filtration. Asymmetric sheath distribution enhances bond points during through-air bonding. Meets exact HTS 5503.20.0015 criteria for bonding-optimized synthetic staple.
Low-Melt Sheath-Core Polyester Bico Fiber 3D 51mm
Polyester bi-component staple fibers featuring sheath-core morphology where the outer copolymer sheath melts below the polyester core, 3 denier fineness and 51mm staple length. Primarily used in airlaid nonwovens for diaper cores and hygiene products via thermal point bonding. HTS 5503.20.0015 applies to these unprocessed fibers engineered for interfiber adhesion.