Square Construction Poly-Cotton Printcloth

Bleached fabric explicitly of square construction per note (f), <85% poly filament mixed cotton, printcloth parameters met. HTS 5407.81.00.30 for precise weave textiles.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China14.9%+35.0%49.9%
🇲🇽Mexico14.9%+10.0%24.9%
🇨🇦Canada14.9%+10.0%24.9%
🇩🇪Germany14.9%+10.0%24.9%
🇯🇵Japan14.9%+10.0%24.9%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

5407.69Lower: 24.9% vs 49.9%

If other mixed woven, not printcloth

Fails specific printcloth weave/yarn criteria.

5208.51Lower: 22.5% vs 49.9%

If 85%+ cotton printed

Cotton chapter for higher natural content.

5408.21Lower: 24.9% vs 49.9%

If special woven fabrics

Narrow or special weaves may apply.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Document square construction with end/pick counts; avoid sets with trims; common issue: non-flat yarns >472 turns/m

Related Products under HTS 5407.81.00.30

Unbleached Poly-Cotton Printcloth Fabric

This woven fabric is made from less than 85% polyester filament yarn mixed mainly with cotton, weighing under 170 g/m², with 43-68 average yarn numbers and over 33 singles yarns per cm² in square construction. Classified under HTS 5407.81.00.30 as unbleached printcloth per statistical note (e). Ideal for printing apparel patterns.

Bleached Polyester-Cotton Printcloth

Bleached plain weave fabric blending under 85% polyester filament with cotton, square construction, not exceeding 170 g/m², average yarn 43-68, >33 singles per cm², no cabled yarns. Fits HTS 5407.81.00.30 printcloth definition for pre-printing textile uses.

White Poly-Cotton Printcloth for Apparel

Unbleached or bleached printcloth of <85% synthetic filament (polyester) mainly mixed with cotton, meeting exact specs: <170 g/m², square weave, 43-68 yarn num, >33 singles/cm². HTS 5407.81.00.30 applies to this pre-dyed base for t-shirts and blouses.

Industrial Poly-Cotton Printcloth Roll

Bleached woven printcloth roll with polyester filament <85% mixed solely with cotton, plain weave square construction under 170 g/m², precise yarn criteria per note (e). Used in garment factories; classified HTS 5407.81.00.30.

Print-Ready Poly-Cotton Bleached Sheeting Alternative

This fabric mimics sheeting but qualifies as printcloth due to yarn numbers 43-68 and >33 singles/cm², <85% poly filament with cotton, bleached, <170 g/m². HTS 5407.81.00.30 distinguishes it from broader sheeting.

Narrow Width Cotton-Poly Printcloth

Bleached printcloth <168 cm wide, <85% synthetic filament mainly with cotton, square plain weave, avg yarn 43-68, no combed/multiple yarns per note (e)(ii). HTS 5407.81.00.30 for specialty printing.