Clearance Elastomeric Monofilament 150 Decitex

Transparent elastomeric monofilament fiber of 150 decitex (clear spandex type), with diameter under 1 mm for high-performance elastic threads. Classified under HTS 5404.11.00.00 due to synthetic elastomeric nature and size specs. Used in lingerie and medical compression garments.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China6.9%+35.0%41.9%
🇲🇽Mexico6.9%+10.0%16.9%
🇨🇦Canada6.9%+10.0%16.9%
🇩🇪Germany6.9%+10.0%16.9%
🇯🇵Japan6.9%+10.0%16.9%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

5403.32.00.00Higher: 45% vs 41.9%

If artificial filament (viscose-based) rather than synthetic

Artificial cellulosic elastomeric filaments fall under 5403, distinguished by base material.

5503.20.00Lower: 39.3% vs 41.9%

If sold as synthetic staple fibers

Cut-to-length elastomeric fibers are classified as staple under Chapter 55, not continuous monofilament.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Conduct denier/decitex conversion accurately (1 denier ≈ 1.11 decitex) for compliance

Retain supplier affidavits on cross-sectional uniformity to avoid disputes

Related Products under HTS 5404.11.00.00

Spandex Monofilament Yarn 100 Denier

A single continuous filament of elastomeric spandex with a linear density of 100 denier (approximately 111 decitex), designed for use in stretch fabrics. It qualifies under HTS 5404.11.00.00 as synthetic elastomeric monofilament exceeding 67 decitex with no cross-section over 1 mm. Primarily used in activewear and form-fitting garments.

Elastane Strip 0.5mm Width for Weaving

Narrow strip of synthetic elastomeric textile material (elastane) with an apparent width of 0.5 mm, used as artificial straw-like insert in woven fabrics. Falls under HTS 5404.11.00.00 as elastomeric strip not exceeding 5 mm width from synthetic textiles. Ideal for decorative braiding or flexible composites.

High-Tenacity Spandex Monofilament 200 Denier

Engineered high-tenacity elastomeric monofilament of 200 denier spandex for industrial elastic components. HTS 5404.11.00.00 applies to its synthetic elastomeric monofilament form >67 decitex, <1 mm cross-section. Suited for conveyor belts and safety harnesses.

Elastic Artificial Straw for Crafts 3mm Width

Elastomeric synthetic strip styled as elastic artificial straw, 3 mm wide for flexible craft weaving. Under HTS 5404.11.00.00 as ≤5 mm synthetic elastomeric strip. Enables stretchable decorative items like bags.

Narrow Elastomeric Ribbon Strip 4mm

Flat 4 mm wide elastomeric synthetic strip resembling narrow ribbon for apparel trim. Qualifies HTS 5404.11.00.00 as synthetic strip ≤5 mm, elastomeric. Adds stretch to garment edges.

Covered Elastomeric Core Monofilament

Bare elastomeric monofilament core (100+ decitex) prior to covering, for custom elastic yarns. HTS 5404.11.00.00 as uncovered synthetic elastomeric monofil. Base for covered spandex yarns.