PE-Coated Bleached Paperboard for Disposable Trays
This bleached paperboard, weighing over 150 g/m² and at least 0.3 mm thick, is coated with polyethylene on one side to provide moisture resistance. It serves as base stock specifically for manufacturing trays, dishes, plates, and similar food service items. Classified under HTS 4811.51.20.30 due to its plastic coating, thickness, and intended use as uncoated base material for conversion into finished products.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness less than 0.3 mm
Thinner sheets of similar bleached, plastic-coated paperboard >150 g/m² fall into the 'other' subheading within the same size category.
If unbleached kraftliner with ≥80% sulfate wood fibers
Unbleached kraft paperboard meeting specific Mullen bursting strength shifts to kraftliner classification in heading 4804.
If converted into boxes or cartons before import
Once formed into finished packaging like trays or boxes, it moves from base stock to heading 4819 for converted paper products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify coating type and weight; must be plastic (e.g
• PE) excluding adhesives to qualify under 4811
• Provide mill test certificates confirming basis weight >150 g/m², thickness ≥0.3 mm, and bleached fiber content
• Avoid classifying as finished articles (heading 4823); ensure imported as base stock, not pre-formed trays
Related Products under HTS 4811.51.20.30
Coated Paperboard Roll Stock for Takeout Cups
Rolls of bleached, plastic-impregnated paperboard exceeding 150 g/m² and 0.3 mm thickness, formulated as base for hot/cold drink cups. Provides grease and liquid barrier for foodservice applications. HTS 4811.51.20.30 due to plastic coating, roll width >15 cm, and explicit 'base stock for cups' use.
Heavy Bleached Board for Airline Meal Trays
Extra-thick (≥0.3 mm) bleached paperboard >150 g/m² with plastic coating for high-end disposable trays used in aviation catering. Large sheet format for efficient die-cutting into trays and compartments. Precisely matches HTS 4811.51.20.30 as base stock for trays/dishes.
Plastic-Coated White Paperboard for Foam Trays
Bleached paperboard base stock over 150 g/m² and 0.3 mm thick, coated with plastics for barrier properties, designed for producing foam-like disposable trays. Meets size requirements for sheets or rolls over 15 cm width. HTS 4811.51.20.30 applies as it's specifically base stock for trays, dishes, plates, cups—not yet formed articles.
Bleached PE-Laminated Board for Disposable Plates
Heavy bleached paperboard (>150 g/m², ≥0.3 mm thick) laminated with polyethylene film, supplied in large sheets for cutting into plate blanks. Used as base stock for single-use plates and saucers in food service. Fits HTS 4811.51.20.30 for its plastic covering, size, and designation as tray/plate stock.
Barrier-Coated Paperboard for Microwavable Plates
Bleached heavy paperboard ( >150 g/m², 0.3+ mm) with multi-layer plastic barrier coating for microwave-safe plates and bowls. Supplied in rectangular sheets exceeding size minima. HTS 4811.51.20.30 for plastic-covered base stock intended for such dishes.