Low-Grammage Recycled Corrugating Liner
Uncoated paper in rolls weighing 11 g/m², composed mainly of recycled pulp with a surface layer of unbleached pulp, exhibiting testliner strength for corrugating medium liner. Precisely matches HTS 4805.24.50.00 for weights not over 15 g/m². Ideal for minimizing material in sustainable packaging.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If weight exceeds 15 g/m² but ≤150 g/m²
Statistical break within same testliner heading based on precise weight thresholds.
If both sides coated, even lightly
Light-weight coated paper requires specific coating weight and mechanical fiber base.
If cut to size and hung as retail pads
Processed into articles like pads shifts from paper in rolls/sheets.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Test for cross-direction stretch if mimicking sack kraft to prevent misclassification
• Use calibrated scales for g/m² verification; discrepancies >5% trigger audits
• Document non-printing use to stay in Chapter 48 per chapter notes
Related Products under HTS 4805.24.50.00
Ultra-Lightweight Recycled Testliner Paper
This is an uncoated testliner paper made mainly from recovered waste paper, weighing only 12 g/m², used as a lightweight liner for corrugated packaging. It meets the HTS 4805.24.50.00 criteria with a Mullen burst index not less than 2 kPa·m²/g and is supplied in rolls for corrugating machines. Its low weight makes it ideal for specialty thin packaging applications.
Tissue-Weight Recycled Linerboard
An extremely thin testliner paperboard at 10 g/m², produced from recycled paperboard scrap with a dyed surface layer, suitable for delicate inner packaging liners. Classified under HTS 4805.24.50.00 due to its low weight, uncoated state, and testliner burst properties. Primarily used in lightweight corrugated flute protection.
Micro-Weight Waste Paper Testliner
Testliner made wholly from waste and scrap paper, weighing 14 g/m² with a minimum Mullen burst index of 2 kPa·m²/g, in rolls for high-speed corrugator machines. Falls under HTS 4805.24.50.00 as lightweight recycled linerboard not further worked. Used for eco-friendly thin-wall box liners.
Featherweight Testliner from Scrap Pulp
Specialty testliner paperboard at 9 g/m² from 100% scrap paper recovery, with Mullen burst index exceeding 2 kPa·m²/g, uncoated in jumbo rolls. Classified in HTS 4805.24.50.00 for its ultra-low weight and recycled composition per subheading notes. Used in micro-corrugated board production.